One Touch Buttons; Changing A One Touch Button - Toshiba DKT3000 Series User Manual

User Programming

One Touch Buttons

One Touch Buttons
One Touch buttons can be used for storing frequently used features or dialed numbers,
such as Speed Dial numbers (use Speed Dial Codes to store additional numbers). One-
touch buttons can be preassigned to your telephone – your System Administrator can
help you identify them.
If you do not have a One Touch button, but you have an available Flexible button, you
can convert the Flexible button to a One Touch button. Perform the procedure called
"Setting/Changing a Flexible Button's Function" on page 69
access code for One Touch button). Once you have created a One Touch button, you
can change the function by using the following procedure.

Changing a One Touch Button

1. Press
2. Press the One Touch button to be set.
3. Enter the digits or special buttons for the function to be dialed. You can include the
following in the dial string:
• Dial pad digits
• A maximum of 32 characters.
• Station and System Speed Dial index (or bin) numbers can be entered. The
Speed Dial index number will automatically dial out on the extension or Line
programmed on the One Touch button with the associated Speed Dial index
number.
• Function buttons, except One Touch or a
• Handset hooking (on-hook/off-hook) cannot be recorded.
4. Press the One Touch button to save the entry.
We suggest writing the name or number of the One Touch button on your button
strip.
70

to enter User Programming Mode.

~ .To program special characters, see
(in Step 4, enter the
Table
3URJUDP
button.
Strata CTX DKT3000/2000-Series Telephone 10/02
9.