Output Level Settings - TANDBERG 550 MXP User Manual

5.5.2

Output Level Settings

The audio out is intended for connection to televisions or audio amplifiers. Digital mode (SPDIF)
is supported when configuring the output to SPDIF mode by the web interface or dataport/XML.
Adjust the audio output level to the loudspeakers.
The volume keys on the remote control also adjust the level of the audio output.
Signal levels - Absolute max.
line level output level
outputs*
Output menu
level settings
0.0 dB
1.5 dB
3.0 dB
4.5 dB
6.0 dB
7.5 dB
9.0 dB
10.5 dB
12.0 dB
13.5 dB
15.0 dB
16.5 dB
18.0 dB
19.5 dB 11.0 Vpp
13.0 Vpp
21.0 dB
22.5 dB 15.5 Vpp
* Applies to Output 1 at volume setting 15.
Note that for the dBu value for input clipping level and absolute max output level, a sine waveform
is assumed. If numbers in dBV are required, dBV value is 2.2 dB lower than the dBu value, e.q. -
10 dBu equals -12.2 dBV
Please see Interfaces for details on the audio connectors.
Vpp dBu
1.2 Vpp -5.5 dBu
1.4 Vpp -4.0 dBu
1.6 Vpp -2.5 dBu
1.9 Vpp -1.0 dBu
2.3 Vpp 0.5 dBu
2.8 Vpp 2.0 dBu
3.3 Vpp 3.5 dBu
3.9 Vpp 5.0 dBu
4.6 Vpp 6.5 dBu
5.5 Vpp 8.0 dBu
6.5 Vpp 9.5 dBu
7.8 Vpp 11.0 dBu
9.2 Vpp 12.5 dBu
14.0 dBu
15.5 dBu
17.0 dBu
Nominal
level
dBu
-23.5 dBu
-22.0 dBu
-20.5 dBu
-19.0 dBu
-17.5 dBu
-16.0 dBu
-14.5 dBu
-13.0 dBu
-11.5 dBu
-10.0 dBu
-8.5 dBu
-7.0 dBu
-5.5 dBu
-4.0 dBu
-2.5 dBu
-1.0 dBu
Administrator Settings
163