Permissions - TANDBERG 550 MXP User Manual

5.1.7

Permissions

Permissions contain settings for incoming telephone Calls, Far End Control, Remote Software
Upgrade and Fallback to Telephony.
Access Code
An access code will help you control the use of the system. All users must enter a code to identify
themselves and the call will be charged on their account. Access Codes are handy for group
systems where there are more users or divisions that share the costs of using the system. Access
Code can be set to "On" and "Off". Please refer to section
Access codes.
When making a call, an Access Code dialog box will be shown. The user must enter
On
the correct password in order to put the call through.
Off No password is necessary to make a call.
Incoming Telephone Calls
The system will accept incoming telephone calls.
On
Off The system will not accept incoming telephone calls. This is useful to prevent
incoming calls from systems other than videoconferencing systems.
Far End Camera Control
On The far end will be able to:
• Control your camera
• Select your video sources
• Activate your camera presets
• Request snapshots
Off The far end can access none of the four features above on the local system. You will
however still be able to control the camera on the far end.
Administrator Settings
Appendix 5 for more information on
113