Connecting Cables - TANDBERG 550 MXP User Manual

TANDBERG 550 MXP

2.2 Connecting Cables

1. Microphone cable
Connect the microphone to the microphone cable.
Connect the microphone cable to microphone input 1 on the system.
2. Monitor cable(s)
To get the best possible picture quality, connect the DVI output of the TANDBERG system to a
flat screen with DVI/VGA input.
With Scart (Europe):
Connect the Scart adapter to one of the Scart connectors on your monitor.
With Scart (Europe) & RCA/S-Video (US):
Audio:
The cable with one RCA connector on one side and two RCA connectors on the other side:
Connect the two RCA connectors to your monitor (or Scart adapter) Audio Left/Right
connectors (the audio signal from the system is a monaural signal and therefore is fed
into both audio-in sockets on the monitor).
Connect the other end to 'Audio Out'.
Video:
Connect the S-video cable to the S-video connector on your monitor (or Scart adapter).
If you do not have an S-video connector on your monitor, connect the RCA-RCA video
cable to the RCA connector on your monitor.
Connect the other end to 'Video Out'.
10