Installing Draft Standard And Hook Up - True TWC-24-OP Use And Care Manual / Installation Instructions

I N S T A L L I N g D R A f T S T A N D A R D A N D H O O K U P
Required Tools and Parts
• Phillips Head Screwdriver
• Adjustable Wrench
• 3/8" I.D plastic tubing (3')
• (2) Hose clamps
Parts:
1. Co tank
2
2. draft Standard
3. draft Standard Screws
4. Pressure regulator
5. rubber Washers
6. Beer line
7. Beer tapper
8. Securing strap
Figure 1
Step 1
Place rubber washer over draft standard mounting holes.
(See figure 1)
CAutIon:
Filled Co tanks are potentially
2
dangerous because of the
pressure they contain. If you are
unfamiliar with their use or the
use of the Co regulator, seek
2
information from your Co supplier.
2
PArtS In kIt
WINE AND BEVERAGE CABINET USE AND CARE MANUAL
Figure 2
Step 2
Install the beer line connector making sure that the
rubber washer is between the hose flange and the draft
standard flange. (See figure 2)
Figure 3
Step 3
Secure the draft standard to the cabinet with the
screws provided. (See figure 3)
Figure 4
Step 4
Install the draft head. (See figure 4).
23