Table of Contents
Advertisement
WINE AND BEVERAGE CABINET USE AND CARE MANUAL
G E N E R A L M A I N T E N A N C E
A. Keeping the condenser coil clean will minimize required
service and lower electrical cost. The condenser coil is
accessible from the front..
B. The condenser coil should be cleaned by removing dust and
other build-up from the tube assembly with vacuum or a cleaning
rag.
C. When properly cleaned you should be able to see through the
tube assembly.
D. Warranty does not cover cleaning the condenser coil.
H O W T O R E M O V E T H E F R O N T G R I L L
1. Remove 2 Phillips screws. (See image 1).
2. Take grill off from top first, then slide out the bottom
3. Once the grill is removed clean the coil with a brush
and vacuum dust and debris.
4. When finished cleaning the condenser coil reinstall
the grill.
H O W T O R E I N S T A L L T H E F R O N T G R I L L
1. Insert tabs on grill into slots on bottom base. (See
image 2 & illustration 3).
2. Then push top of grill over stainless lip.
3. Finally, screw back into place.
Image 1. Removing grill.
Tabs that install
into the bottom of
the cabinet.
Image 2. Exposing condenser coil for cleaning.
18
R E P L A C E M E N T P A R T S
True maintains a record of the cabinet serial number for your
cooler. If, at any time during the life of your cooler, a part is
needed, you may obtain that part by providing the model number
and serial number to the company from whom you purchased the
cooler. For replacement parts, contact the dealer from whom you
purchased the refrigerator or call True parts department at 1-800-
424-TRUE. Inquires can be sent to the following address:
Attention: Parts Department
True Manufacturing
2001 East Terra Lane
O'Fallon, MO 63366-4434
Side View of
Cabinet Front Grill
Image 3. Side View (Front
grill tabs slide into the
bottom of the cabinet).
Hide quick links:
Advertisement
Table of Contents
