Table of Contents
Advertisement
I N S T A L L I N G T R U E S I G N A T U R E
L O U V E R G R I L L , C O N T I N U E D
10) Install the steel strip for the new louver grill by pushing
it on the front lip of the opening. (See image 4).
11) Install the new louver grill. The bottom of the grill has
very strong magnets. Press the magnets onto the steel strip
and install the top two Phillips screws.
12) Installation is complete. (See image 5).
Image 4.
Image 5.
WINE AND BEVERAGE CABINET USE AND CARE MANUAL
I N S T A L L I N G A N T I - T I P B R A C K E T S
R E Q U I R E D F O R S T A C K E D A N D
D R A W E R U N I T S
Tip Over Hazard: A child or adult can tip the refrigerator and
may cause property or bodily harm. Connect anti-tip brackets
to the rear feet of the unit. Reconnect the anti-tip bracket if the
product is moved. Failure to follow these instruction can result
in property or bodily harm.
Read all installation instructions first. Install the anti-tip brackets
to hold both rear legs of the stack combo or drawer refrigerator.
Follow these steps to secure the brackets to the floor before
moving the unit into final operating position.
Contact a qualified floor covering installer for the best procedure
of drilling mounting holes through your type of floor covering.
Before moving the unit, take precautions to protect the floor
covering.
Determine the location of the unit. From the front of the
determined location of the lower louver grill, measure back
21 3/4". From the determined side of the unit, measure over
13/16". This is where the back and outer side of the bracket
should sit. Using the bracket as a template mark the holes
for drilling. (See illustration 1).
To mount the anti-tip bracket to wood floor, drill pilot holes for
each of the bracket holes (4 total). To mount the anti-tip bracket
to concrete or ceramic floor use a masonry bit to drill pilot holes.
Align anti-tip bracket holes with the holes in the floor. Fasten
anti-tip bracket with screws provided using the brass colored
screw for wood, or blue colored masonry screw for concrete.
Move unit into final position making sure rear leveling legs slide
into the anti-tip brackets.
/
13
16"
Bracket Locator
Grill (front)
Illustration 1.
/
13
16"
15
Hide quick links:
Advertisement
Table of Contents
