Table of Contents
Advertisement
I N S T A L L I N G O V E R L AY PA N E L S F O R G L A S S
D O O R & S O L I D D O O R M O D E L S , C O N T I N U E D
7) There are pre-marked areas on the front of the door. Drill these
pre marked holes with 1/8" drill bit. (See image 6). Make sure to
go all the way through the door.
8) It is recommended to clamp the door front on top of the
overlay before drilling pilot holes and installing anchor screws.
The clamp ensures the overlay panel and door stay aligned with
each other while installing. (See image 7).
If a handle is being used on the overlay panel, install it before
Step 8. Use flat head screws or recess the screws for flush
install of the overlay panel onto the refrigerator door. (See
9) Once all holes are pre-drilled, use the appropriate size screws
to secure the overlay panel onto the front of the refrigerator door.
(See image 9).
10) Reinstall all components in reverse order. The door gasket
snaps back into place.
Image 6. Pre-drill holes through door front.
Image 7. Clamp door front with the overlay panel.
NOTE:
image 8).
WINE AND BEVERAGE CABINET USE AND CARE MANUAL
Image 8. Install handle on overlay.
Image 9. Anchor overlay on door front.
Image 10. Finished installation
11
Hide quick links:
Advertisement
Table of Contents
