Table of Contents
Advertisement
WINE AND BEVERAGE CABINET USE AND CARE MANUAL
S T A R T U P / T E M P E R A T U R E
C O N T R O L
A. Plug in the cooler.
B. TWC models are set from the factory at 55˚F, which is ideal
for red wine. Should you wish to adjust the temperature, hold
down set until temperature flashes, then move arrow up or down
depending on your desired setting.
C. TBC & TUR models are set from the factory at 35˚F.
D. Excessive tampering with the control could lead to service
difficulties. Should it ever become necessary to replace the
temperature control, be sure it is ordered from your True dealer
or authorized service agent.
RECOMMENDATION
Before loading product, we recommend running your True unit
empty for 24 hours. This allows you to be sure electrical wiring
and installation are correct and no shipping damage has occurred.
S H E L V I N G O P E R A T I O N
A. The shelves and wine racks are installed into pilasters located
on the back interior wall of the unit. The configuration of the
shelves and wine racks can be rearranged to your specific needs.
Removing and installing the shelves and wine racks is a basic
operation that can be completed in a timely manner. Please refer
to below instructions to alter your shelving configuration.
B. To adjust the height or remove wire shelves, please pull up
on the shelf so that brackets/supports are removed from shelf
pilasters in the back of the cabinet.
Image 2. Install wine rack at the bottom of the refrigerator.
C. To install wire shelves, insert the shelves into the pilasters
located on the back wall of the refrigerator. Make sure the
brackets/supports are locked firmly into both pilasters on either
corner. (See illustration 1 and image 1)
Image 3. Install supports into cabinet pilasters.
Illustration 1.
Wine Rack
Pilasters
Shelf Glides
Image 1. Install wire shelf into cabinet pilasters.
Supports
Illustration 2.
16
Hide quick links:
Advertisement
Table of Contents
