Table of Contents
Advertisement
S H E L V I N G O P E R A T I O N , C O N T I N U E D
D. The wine cradle rests on the floor of the cabinet. (See image 2).
E. To adjust the height or remove the glide out wine racks, please do
the following:
1. Remove wine rack from shelf glides by pulling up
on the actual wine rack. The shelf glides are connected
to the shelf supports, so 1 support on each side (2 total)
should be remaining. (see illustration 2)
2. Place the wine rack on the floor next to the unit.
3. Remove each rack support & glide by lifting the entire
piece up and out, so that the brackets in the back are
released from the pilasters.
F. To install the glide out wine rack, please do the following:
1. Place the support and shelf glide (one piece) into
the pilasters at the back of the unit. Confirm the
brackets on the back of the support and shelf glide
are firmly locked into the pilaster (see image 3).
Install supports individually and confirm that
each support is level with each other.
2. Insert wine rack onto shelf glide/supports by pushing
down firmly on the wine rack once in place. (see images
4-6). Note, if tab does not fit correctly/lock between the
front facing/handle and actual wine rack, you may need
to adjust the screws that hold the front facing/handle
to the actual wine rack. By loosening the screws, the
opening will widen, allowing tab to fit properly.
3. Confirm operation by gliding rack in/out.
D R A W E R D I V I D E R I N S T A L L A T I O N A N D
O P E R A T I O N
A. The True Professional TUR-24D (Drawer Unit) comes with clear
drawer dividers. (See image 7).
B. To install and remove drawer divider:
1. Insert one end of the divider into the slotted side holes
inside the drawer. (See image 8).
2. Carefully flex the drawer divider and insert the other side
into the opposite side of the drawer. (See image 9).
3. To remove the divider follow the previous instructions
backwards.
Image 7.
WINE AND BEVERAGE CABINET USE AND CARE MANUAL
Shelf Glide
Image 4.
Image 5. Slide supports on either side into the
bottom of the wine rack. A tab at the end of the
supports slide behind the face of the wine rack.
Image 6. Install wine rack into supports.
Image 8.
Image 9.
Wine Rack
(Front Facing)
Tab
Wine Rack
(Front Facing)
Tab
Shelf Glide
17
Hide quick links:
Advertisement
Table of Contents
