Table of Contents
Advertisement
WINE AND BEVERAGE CABINET USE AND CARE MANUAL
I N S T A L L I N G O V E R L AY PA N E L S F O R
D R A W E R E D M O D E L S
Tools Needed:
• Phillips Screwdriver
• 1/8" Drill Bit
See page 7 for custom panel
dimensions before installing.
For easy overlay installation, drawer front
removal is required.
1) Open the drawer and detach the front drawer panel by
removing four #2 Phillips screws (two on each side). (See image
1) Save all these screws for later reinstallation.
2) Remove front drawer panel gasket. (See image 2)
3) Using a 1/8" drill bit, drill out the eight pilot holes (each
drawer) from the front of the drawer panel. Drill completely
through the panel. (See image 3).
4) Attach drawer handle to the front of the overlay panel. Attach
handle before step 5. (See image 4).
5) Lay overlay panel face-down on a safe solid surface. Lay
drawer panel face-down on top of the overlay panel. Align panels
and secure with a clamp. Lay cardboard or other soft or safe
material down before working on drawer front. (See images 5 &
6).
(Continued on next page.)
Image 1. Remove four #2 Phillips screws from front drawer
panel, two on each side.
Image 2. Remove gasket from front drawer panel.
12
Image 3. Drill out eight pilot holes from the front of the drawer
panel.
Image 4. Attach drawer handle to overlay panel.
Image 5. Lay overlay panel, then drawer panel face-down,
then align.
Image 6. Once panels are aligned, secure with clamp.
Hide quick links:
Advertisement
Table of Contents
