After Changing A Printer Driver Setting, The Next Print Did Not Reflect The Change - Rimage 2000i Knowledge Base

Rimage 2000i™ Knowledge Base
After changing a printer driver setting, the next print did not reflect the
change.
Change Printer Driver Settings
If you are using CD Designer, you must change the printer driver settings through CD Designer
with the label file open. The CD Designer label file settings override the printer driver settings.
1. From CD Designer, open the label file.
2. Navigate: File > Print. The Print window opens.
3. Select Printer Properties.
4. Make any desired changes to the printer settings.
5. Select OK.
6. Close the Print window.
7. Save the label file.
8. Print the disc.
Change Label Templates
You can change the label template so all labels created afterward will have the desired change.
1. Open the Rimage.btw file, located in "C:\Program Files\Rimage\CD Designer\"
2. Navigate: File > Print. The Print window opens.
3. Select Document Properties.
4. Make any desired changes to the printer settings.
5. Select OK.
6. Close the Print window.
7. Save the label file as Rimage.btw.
14
August 3, 2007 ©Rimage 2007