Install Printer Driver - Rimage Professional Endeavor Quick Start Instructions

Install Printer Driver

Power on the autoloader before
powering on the PC.
Place the Software Suite disc
in CD-ROM drive and close
drawer.
If the Rimage Producer
Software installation starts,
Cancel the process.
110752-000
Power on the PC.
Select Windows Start and select Run.
Browse to select \Printer Drivers\Everest2\Setup.exe
from the CD-ROM drive and select OK.
Follow the prompts and select a
USB port for the Everest II printer.
When the "Found New Hardware Wizard"
displays, select Cancel.
Install front panel.
Page 4