How Do I Reinstall The 480I Printer Driver - Rimage 2000i Knowledge Base

Rimage 2000i™ Knowledge Base

How do I reinstall the 480i printer driver?

1. Unplug the USB cable that attaches the Rimage 2000i to the computer.
2. Follow the instructions below for your software.
•
If you are using OfficeNet Software Suite:
a. Navigate: Start menu> Settings> Control Panel> Add or Remove Programs.
b. Select Rimage OfficeNet Software Suite.
c. Uninstall the printer driver.
i. Select Change/Remove > Modify. > Next.
ii. Clear the Printer Driver checkbox.
iii. Select Next.
iv. When prompted, select Yes to restart the computer.
d. Reinstall the printer driver.
i. Insert the OfficeNet Software CD.
ii. Run setup.exe from the CD.
iii. Select the Printer Driver checkbox.
iv. Select Next.
v. When prompted, select Yes to restart the computer.
vi. Plug in the USB cable.
vii. If the Found New Hardware Wizard prompts you to connect to the internet,
select No.
viii. In the Found New Hardware Wizard, select Install the software
automatically. A warning message that the software has not passed Windows
Logo Testing displays.
ix. Select Continue Anyway to install the driver.
x. When the driver installation is complete, select finish.
•
If you are using Rimage 2000i Software:
a. Navigate: Start Menu > Printers and Faxes.
b. Uninstall the printer driver.
i. Select 480i Printer Driver.
ii. Delete the 480i Printer Driver.
c. Reinstall the printer driver.
i. Plug in the USB cable.
ii. If the Found New Hardware Wizard prompts you to connect to the internet,
select No.
iii. In the Found New Hardware Wizard, select Install the software
automatically. A warning message that the software has not passed Windows
Logo Testing displays.
iv. Select Continue Anyway to install the driver.
v. When the driver installation is complete, select finish.
August 3, 2007 ©Rimage 2007
13