Setting Up The Phone; Connecting Network And Power Sources; Power Over Ethernet - Polycom SoundStation IP 6000 User Manual

User Guide for the Polycom SoundStation IP 6000 Phone
Note

Setting Up the Phone

Note

Connecting Network and Power Sources

Note
1 - 2
Generally, your phone will be deployed with multiple other phones. In this case,
your system administrator will configure the phone parameters beforehand, so that
after you set up your phone, the phone will be registered and ready to use.
If your phone is not part of a large phone deployment, your phone may not be
registered after you set it up. Before you use your phone, you or your system
administrator will have to register it.
For detailed information on how to register your phone after you install it, see
Registering Standalone SoundPoint IP, SoundStation IP, and Polycom VVX 1500
44011), available from the
Phones (Quick Tip
Profiles Support Web page.
This section describes how to set up your phone. It includes the following
topics:
• Connecting Network and Power Sources
• Connecting Optional Extension Microphones to Your Conference Phone
on page 1-4.
• Connecting an Optional Polycom® Wireless Lapel Microphone to Your
Conference Phone
To obtain microphones, see your Polycom reseller.
There are two ways to connect your phone to the network and a power source.
Your system administrator can tell you which of the following methods best
suits your teleconferencing needs:
• Power over Ethernet (PoE)
• AC Power

Power over Ethernet

Power over Ethernet is the default connection for your phone.
AC power adapters are not included in the PoE package. If you require one, see
your system administrator.
Technical Notifications & Feature
on page 1-5.
on page 1-2.