Appendix B: Networking Checklist - Lorex ECO 2 Instruction Manual

Appendix B: Networking Checklist

Use this checklist to confirm you have completed all the steps of the Network Setup.
I have the following:
• High-Speed Internet
• Router
• Ethernet cable (included with the system)
• Computer
I have turned off the system and performed the following:
• Connected the Ethernet cable to the LAN (RJ45) port on the rear panel of the system
• Connected the other end of the Ethernet cable to my router
NOTE: Network Setup will not work if you do not have a router.
I have found my System Information:
• Press the PTZ /
My IP Address is: ________________________________________________
My MAC Address is: ______________________________________________
My HTTP Port is: _________________________________________________
I have enabled Port Forwarding on my router:
• HTTP Port (default: 80)
• Client Port (default: 9000)
• Mobile Port (default: 1025)
NOTE: For added security, we strongly recommend changing HTTP port 80 on the system to
any desired port
NOTE: Each router is different, so port forwarding settings vary by model. If your router is not
listed, please refer to your router's manual or contact your router's manufacturer for
assistance.
button on the front panel of your system
—the port must not blocked by your Internet service provider (ISP).
Appendix B: Networking Checklist
105