Rear Panel; 4-Channel - Lorex ECO 2 Instruction Manual

Rear Panel

4-Channel

1 2 3
8-Channel
1 2 3
1 DC12V: Connect the included AC power adapter.
2 On / Off Switch: Turns the DVR on or off.
3 PTZ / Alarm Block: Connect compatible PTZ cameras (not included) or alarm devices (not
included).
4 LAN: Connect a CAT 5 RJ45 Ethernet cable for local and remote connectivity.
5 USB Ports: Connect a USB mouse (included) or USB flash drive (not included) for data
backup or firmware updates.
6 HDMI: Connect to a HDMI-compatible TV or monitor (not included) to view the system
interface.
NOTE: HDMI resolution is up-scaled. Connect an RCA cable (not included) to the Audio Out port
to play audio from the DVR.
7 VGA: Connect a VGA monitor (not included) to view the system interface.
8 Video Output: Outputs the DVR interface to a BNC connection. This allows you to see your
mouse cursor and have full control of the system on a secondary monitor.
NOTE: Use a BNC to RCA adapter (not included) to connect the DVR to RCA inputs (i.e. for a TV
connection).
4 6 7
5
4 6 7
5
8 9
8 9
10 11
10 11
5