Networking Checklist - Lorex L19WD800 Series Instruction Manual

Appendix 3: Setting Up Remote Viewing

Networking Checklist

Use this checklist to confirm you have completed all the proceeding steps of the Network Setup.
1. I have the following:
• High-Speed Internet
• Router
• Ethernet cable (provided with the system)
• PC with Lorex Client Software installed
2. I have turned off the system and performed the following:
• Connected the Ethernet cable to the back of the system
• Connected the other end of the Ethernet cable to my router
Note: Network Setup will not work if you do not have a router.
3. I have found my System Information:
• Press and hold the Enter button on the Front Panel for three seconds
OR
• System Main Menu>Configuration>System Information
My IP Address is:
My MAC Address is:
Note: If your IP Address is showing 127.0.0.1, please return to Step 1 and review
all of your connections.
4. I have enabled Port Forwarding on my router:
a. Port 80
b. Port 5000
Note: Each router is different, so port forwarding settings vary by model. Please
visit us on the web at
routers. If your router is not listed, please refer to your router's manual or contact
your router's manufacturer for assistance.
www.lorexcctv.com for assistance with the latest types of