System Board Connectors - Dell PowerVault 775N Installation And Troubleshooting Manual

Table A-1. System Board Jumper Settings
Jumper Setting
PASSWD
(default)
NVRAM_CLR
(default)
SPARE —
NOTE: For the full name of an abbreviation or acronym used in this table, see

System Board Connectors

See Figure A-3 and Table A-2
Figure A-3. System Board Connectors
Description
The password feature is enabled.
The password feature is disabled.
The configuration settings are retained at system boot.
The configuration settings are cleared at next system boot. (If the configuration settings become
corrupted to the point where the system will not boot, install the jumper and boot the system.
Remove the jumper before restoring the configuration information.)
To store a spare, unused jumper.
for the location and description of system board connectors.
"Abbreviations and Acronyms."