Dell PowerVault 775N Installation And Troubleshooting Manual page 5

Table 2-1 lists the system's status indicator codes.
Figure 2-1. System-Status Indicators
Table 2-1. System-Status Indicator Codes
Bezel Indicators Back-Panel Indicators Indicator Code
Status Caution
Off Off Off
On Off Blue
Off Blinking Amber blinking
Blinking Off Blue blinking
System Identification Indicators
The identification buttons on the front and back panels can be used to identify a particular system within a rack. See
to locate the front-panel system identification button. See
Figure 2-2
button and indicator.
When either of the identification buttons is pushed, the identification indicator on the back blinks until one of the buttons is
pushed again. If the bezel is installed, the system status indicator will also blink. If an indicator is connected to the back-
panel system status indicator connector, that indicator will also blink.
Systems management software can also be used to cause the status and identification indicators to blink to identify a
particular system. For more information, see the systems management software documentation.
Front-Panel Indicators and Features
Additional indicators are located behind the bezel. The front-panel status LCD provides information using an alphanumeric
character display (see "LCD Status
Figure 2-2 shows the front-panel features of the system.
Figure 2-2. Front-Panel Features
No power is available to the system.
The system is operating normally.
The system has detected an error and requires attention.
The system is identifying itself (see
Messages"). See Figure 2-2
Table 2-2
"System Identification
Figure 2-3 to locate the back-panel system identification
for the front-panel indicators and features.
describes the front-panel features.
Indicators").