Dell™ PowerVault™ NAS SCSI Cluster Platform Guide w w w . d e l l . c o m | s u p p o r t . d e l l . c o m...
Page 2
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, PowerEdge, and PowerVault are trademarks of Dell Inc.; Microsoft and Windows are registered trademarks of Microsoft Corporation; Intel is a registered trademark of Intel Corporation.
(SCSI) cluster solution. The configuration information in this document is specific to the cluster configuration listed in Table 1-1. NOTE: Configurations not listed in this document are not certified or supported by Dell or Microsoft. Table 1-1. PowerVault NAS System SCSI Cluster Configuration Systems...
You must install the PERC card in a 64-bit PCI/PCI-X slot up to 133 MHz or a 32-bit, 33-MHz PCI slot. See Table 1-2 for information about your specific system. If you are using multiple PERC cards, Dell recommends that you install them on separate PCI buses for load balancing.
Page 5
If you need to call Dell for technical support, complete this sheet before you call and have it available for the technician to assist you with your problem.
Page 6
Cluster Type PowerVault NAS SCSI Cluster Solution Cluster Service account Cluster Service password Installer Date Installed Applications Location Notes Node Server Type (Server Name) Node 1 Node 2 Network Settings TCP/IP Address Node 1, network adapter 1 Node 1, network adapter 2 Additional node 1 network adapter(s)
Need help?
Do you have a question about the PowerVault 775N and is the answer not in the manual?
Questions and answers