Dell PowerVault 770N Configuring
Configuring windows firewall to work with dell powervault nas systems
Hide thumbs
Also See for PowerVault 770N:
- Installation manual (176 pages) ,
- Information update (26 pages) ,
- Platform manual (10 pages)
Advertisement
Quick Links
Download this manual
See also:
Installation Manual
;
Configuring Windows® Firewall to Work With Dell™
PowerVault™ NAS Systems
Authored by:
Veronica Hernandez
May 6 2005 ver A00
____________________
Information in this document is subject to change without notice.
© Copyright 2005 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
THIS WHITE PAPER IS FOR INFORMATIONAL PURPOSES ONLY, AND MAY CONTAIN
TYPOGRAPHICAL ERRORS AND TECHNICAL INACCURACIES. THE CONTENT IS PROVIDED AS IS,
WITHOUT EXPRESS OR IMPLIED WARRANTIES OF ANY KIND.
Dell, the DELL Logo, PowerVault, and OpenManage are trademarks of Dell Inc. Microsoft and Windows Server
are registered trademarks of Microsoft Corporation. Other trademarks and trade names may be used in this
document to refer to either the entities claiming the marks and names or their products. Dell disclaims
proprietary interest in the marks and names of others.
Advertisement
Related Manuals for Dell PowerVault 770N
Summary of Contents for Dell PowerVault 770N
- Page 1 Microsoft Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell disclaims proprietary interest in the marks and names of others.
- Page 2 Firewall. With a carefully planned configuration and a few simple steps you can easily configure the Firewall to work with your Dell PowerVault NAS system. For example, if Windows® Firewall is enabled, it may be blocking incoming network traffic on Transmission Control Protocol (TCP) port 445. To connect to a NAS system remotely, that remote system must allow incoming network traffic on TCP port 445.
- Page 3 CONFIGURING WINDOWS FIREWALL TO WORK WITH DELL POWERVAULT NAS SYSTEMS VER A00 • Figure 1 Windows Firewall PAGE 3 5/062005...
- Page 4 CONFIGURING WINDOWS FIREWALL TO WORK WITH DELL POWERVAULT NAS SYSTEMS VER A00 • Figure 2 Start the Windows Firewall Service Go to the Exceptions tab, highlight File and Printer Sharing and select Edit. Select the box next to TCP 445 and select OK.
- Page 5 CONFIGURING WINDOWS FIREWALL TO WORK WITH DELL POWERVAULT NAS SYSTEMS VER A00 • Figure 3 Firewall Exceptions • Figure 4 Enable Port 445 Continuing from the exceptions tab, create new exceptions for the NAS Manager Admin site, the NAS Manager Shares site and the Dell Open Manage Server Administrator site.
- Page 6 CONFIGURING WINDOWS FIREWALL TO WORK WITH DELL POWERVAULT NAS SYSTEMS VER A00 Select Add Port, in the Edit a Port window type WebUI Admin Site in the Name field, in the Port number field enter 1279 then select the TCP protocol.
- Page 7 CONFIGURING WINDOWS FIREWALL TO WORK WITH DELL POWERVAULT NAS SYSTEMS VER A00 • Figure 6 Create Exception for WebUI Admin Site • Figure 7 Create Exception for WebUI Shares Site PAGE 7 5/062005...
- Page 8 CONFIGURING WINDOWS FIREWALL TO WORK WITH DELL POWERVAULT NAS SYSTEMS VER A00 • Figure 8 Create Exception for Server Admin Site • Figure 9 Turn on Firewall PAGE 8 5/062005...
- Page 9 • Dell and Microsoft Alliance Page • Dell Power Solutions • The latest driver, firmware, and BIOS for your system can be downloaded from Support.Dell.Com. • Microsoft Windows Server 2003 home page. • Technical Overview of Windows Server 2003 Service Pack 1 from Microsoft TechNet.