Rollover Sensor - Royal Enfield Classic 500 Owner's Manual

Rollover Sensor

ROLLOVER SENSOR
Your motorcycle is fitted with a unique "Roll Over
Sensor" under rider seat. This is a safety feature.
In the event of an accident OR if the motorcycle
falls over on its side with the engine running.
The "Roll Over Sensor" will switch off Ignition and
cut off fuel supply to prevent the motorcycle from
moving suddenly, if it is in gear.
To re-activate the system after the motorcycle has
been made upright, please switch off both the
Ignition & Engine kill switch, wait for a few seconds
and switch "ON" again.
This will help to RESET the "Roll Over Sensor" and
the engine can be started / run.
34