Changing Electrical Components; Headlamp Bulb Replacement - Royal Enfield Classic 500 Owner's Manual

Minor Maintenance Tips

CHANGING ELECTRICAL COMPONENTS

HEADLAMP BULB REPLACEMENT

Loosen the head lamp
holding top screw. Then
pull out head lamp
assembly.
Detach bottom lug from
the head lamp housing
body.
Disconnect head lamp
wire connectors Green,
orange and blue color
terminals.
C C C C C AUTION : AUTION : AUTION : AUTION : AUTION :
Never touch the bulb with your fingers, Finger prints
with etch the glass and decrease bulb life. Always grab
the bulb with paper or clean dry cloth during handling.
Remove rubber grommet
f r o m t h e r e f l e c t o r
assembly
Gently press the bulb
holding U clip from both
the sides downwards
and release it from
reflector slot as shown.
Pull out head lamp bulb
and inspect its filament
for fuse
60