Fuel, Malfunction Indicator & Rollover Sensor - Royal Enfield Rumbler 500 2017 Manual

FUEL, MALFUNCTION INDICATOR & ROLLOVER SENSOR
MALFUNCTION INDICATOR LAMP (MIL)
A Malfunctioning Indicator Lamp
(MIL) is provided the RPM (Tacho)
meter located on the right side of the
Cluster unit.
There are 8 indications in this unit
1. EFI Mal Function Indicator
When both the Ignition & Engine kill
switch is "ON", the MIL will glow for
few seconds and will go "OFF". This indicates that all
the functions of Electronic Control Unit (ECU) and other
sensors are working perfectly and the motorcycle can
be used.
In case of any malfunctioning of the ECU or other
sensors etc., the MIL will glow continuously. In the event
of any such phenomenon, it is recommended to take
the motorcycle to a nearest Royal Enfield Authorised
Dealer for inspection and further necessary action.
ROLLOVER SENSOR
Your motorcycle is fitted with
a unique "Roll Over Sensor"
under the seat. This is a safety
feature.
In the event of an accident OR
if the motorcycle falls over on
any side with the engine
running condition,
The "Roll Over Sensor" will switch off Ignition and cut
off fuel supply to prevent the motorcycle from moving
suddenly, if it is in gear.
To re-activate the system after the motorcycle has been
made upright, please switch off both the Ignition &
Engine kill switch, wait for a few seconds and switch
"ON" again.
This will help to RESET the "Roll Over Sensor" and the
engine can be started / run.
30