Rollover Sensor
ROLLOVER SENSOR
Your motorcycle is fitted with a unique Roll Over
Sensor under the seat. This is a safety feature.
In the event of an accident OR if the motorcycle
falls over on any side with the engine running
condition, The Roll Over Sensor will switch off
Ignition and cut off fuel s upply to prevent the
motorcycle from moving suddenly, while it is in gear.
To re-activate the system after the motorcycle has
been made upright, please switch off both the
Ignition & Engine kill switch, wait for a few seconds
and switch ON again.
This will help to RESET the Roll Over Sensor and
the engine can be started/ run.
44