Brake Fluid; Inspection Of Tyres And Wheels - Royal Enfield Classic 500 Owner's Manual

Classic 500
Hide thumbs Also See for Classic 500:
Table of Contents

Advertisement

Minor Maintenance Tips

BRAKE FLUID

Check if oil is above 'min' level. To top up, remove
cover and diaphragm and top up with either DOT 3
or DOT 4 as specified.
CAUTION :
Please take care that it does not spill over any other
parts of the motorcycle. Please wipe the spilled
brake fluid immediately, if there is any spill over,
using a soft cloth (preferably a wet cloth) to avoid
damage to paint work or other parts.
MAX
MIN

INSPECTION OF TYRES AND WHEELS

Inspect the tyre periodically for tread wear,
cracks and cuts.
Minimum tread depth :
Minimum tread depth :
Front tyre : 1mm
Check and remove stone, splinters, nails or
other particles embedded in the tyre treads.
Bald spots / swelling may be caused by internal
damage. Replace the tyres, if defective.
Replace tyres when the tread depth has
reached the minimum as specified.
Periodically inspect wheels for spokes
breakage and wheel rim run out.
Check proper seating of the tyre beading on
the rim whenever the tyre is reassembled.
Whenever a new tyre is installed, ensure rim
and spokes do not get damaged on account of
using wrong levers.
49
Rear tyre : 2 mm

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents