Paging - 3Com NBX 1105 Telephone Manual

Paging

To park a call:
1 While you are on a call, press Feature button and 444, or press the
Access button assigned to Call Park.
2 Use the telephone key pad to dial a Call Park extension from the list
shown in Table 8.
If you select a Call Park extension that is already in use, the display panel
displays
Park Cancelled
can try another Call Park extension.
3 If you want to notify another user about the parked call:
a From an NBX Business Telephone, select an Access button that is
assigned for placing telephone calls, and dial the user's extension, or
page them. See "Paging" in the next section for details.
b From an NBX Basic Telephone, press the switch hook. When you hear
the dial tone, dial the user's extension, or page them. See "Paging" in
the next section for details.
To retrieve a parked call:
1 Pick up the handset of any telephone on the system.
2 Dial the Call Park extension assigned to the call.
In certain circumstances, you can broadcast a message from NBX
telephones using the Paging feature.
The default codes, or extensions, that you dial for paging are shown in
Table 9.
Table 9 Paging Extensions (Feature Codes)
Type of
Paging
External
Internal
Simultaneous
Do not press the Feature button on your telephone before you begin a
page, or you may activate a personal speed dial feature.
and the call rings back to your telephone. You
NBX 100
(default codes)
620
621
622
Paging 69
SuperStack 3 NBX
(default codes)
6200
6201
6202