Phrase Memory Settings; Naming Phrase Memories (Memory Names); Adjusting The Phrase Memory Volume (Memory Level); Setting The Output Jacks For The Sounds Being Input - Boss RC-300 Loop Station Owner's Manual

Phrase Memory Settings

Here you can make settings that apply to the entire phrase memory .
First press the [MEMORY EDIT] button .
For details, refer to "Basic Editing Procedure" (p . 9) .
Parameter
Memory: Name
INIT MEMORY
Memory: Level
Memory: Input Out
MAIN+SUB
20
Value Explanation
Naming Phrase Memories ( Memory Names)
You can give names to phrase memories (memory names) using up to 16 characters .
To access the memory name screen, press the [MEMORY EDIT] button and then press the [
MEMO
Normally, the [ ]/[ ] buttons are used to select parameters, but in the memory name screen they are used
to move the cursor . When the cursor is located at the far right, pressing the [
you to the next parameter .
Use the [ ]/[ ] buttons to move the cursor to the character that you want to edit, and turn the [MEMORY/
VALUE] knob to edit the character . You can also use the following buttons .
Button
CAPS (RHYTHM EDIT)
INS (RHYTHM ON/OFF)
DEL (RHYTHM TAP TEMPO)
Adjusting the Phrase Memory Volume ( Memory Level)
100
You can adjust the phrase memory volume .
This is convenient when you want to adjust the output volume for both the MAIN OUTPUT and SUB OUTPUT jacks
simultaneously .
Normally, this is set to the center with a level of 100 .
0–200 Volume of the phrase memory

Setting the Output Jacks for the Sounds Being Input

( Input Output Select)
This selects the output jacks to be used for the output of sounds arriving at the INPUT jacks (AUX, INST, MIC) .
If desired, you can also make this setting apply to all phrase memories . g "Using the Same Output Jacks for All
Phrase Memories (Input/Track 1, 2, 3/Rhythm Output)" (p . 33)
MAIN The sound is output from the MAIN OUTPUT and PHONES jacks .
The sound is output from the SUB OUTPUT jacks . The sound is not output from the MAIN
SUB
OUTPUT and PHONES jacks .
MAIN+SUB The sound is output from the MAIN and SUB OUTPUT jacks and the PHONES jack .
The input sound will not be output .
MUTE
* Tracks will be recorded .
Function
Alternately switches the letter at the cursor position between uppercase and
lowercase .
Inserts a blank space at the cursor position .
Deletes the character at the cursor position and shifts all characters after it to the
left .
] button .
] button once again will take