Settings For Each Track; Specifying How The Track Will Play (Play Mode); Playing A Track Backward (Reverse); Specifying The Number Of Measures In A Track (Measure) - Boss RC-300 Loop Station Owner's Manual

Settings for Each Track

Here you can specify the playback method and other settings individually for each track .
First press the [EDIT] button of the track that you want to edit .
For details, refer to "Basic Editing Procedure" (p . 9) .
Parameter
Track1: Play Mode
Track1: Reverse
Track1: Measure
(BPM120.0) (BPM120.0)
Original Tempo (p . 19)
Track1: Stop Mode
IMMEDIATE
Track1:PlayLevel
Value Explanation

Specifying How the Track Will Play (Play Mode)

LOOP
This specifi es whether the track playback will be looped or one-shot (i .e ., not looped) . This specifi es whether the track playback will be looped or one-shot (i .e ., not looped) .
Track 1 Loop
One Shot
Track 2
Track 3 Loop
* Recording/overdubbing cannot be carried out with respect to tracks that are set to "ONE SHOT . " To create a track
intended for one-shot playback, you fi rst need to carry out recording/overdubbing while it is set to "LOOP" and save
it . Then, you should change its setting to "ONE SHOT . "
LOOP Conventional loop playback .
The phrase will play only once from the beginning to the end of the track, and then stop
automatically .
ONE SHOT
If you press the [REC/DUB/PLAY] pedal during playback, playback will begin again from the
beginning of the track (Retrigger Playback) .

Playing a Track Backward (Reverse)

OFF
This specifi es whether the track will play forward in the conventional manner, or play backward in time (reverse playback) .
OFF Playback is normal .
ON Playback is reversed .

Specifying the Number of Measures in a Track (Measure)

AUTO AUTO
You can specify the number of measures for each track . When recording rhythm sounds or when recording along
with other tracks, it's convenient to specify the number of measures before you record, so that looping will occur at
the specifi ed measure length, even if you don't operate the pedal when you've fi nished recording .
Track 1 One measure
Four measures
Track 2
Track 3 Eight measures
Tracks that are set to AUTO will have the same number of measures . The number of
measures is determined by the fi rst-recorded track of the tracks that are set to AUTO . For
AUTO example, if all tracks are set to AUTO, the value set as the number of measures for the
second and subsequent tracks will be identical to the number of measures in the fi rst track
that was recorded .
FREE The number of measures will be set automatically, corresponding to the length of the recording .
1, 2, 3 . . . The number of measures will be set manually .

Specifying How the Track Will Stop (Stop Mode)

This specifi es how the track will stop when you press the [STOP] pedal .
• The PLAY indicator will blink until playback stops .
• If you press the [STOP] pedal once again before playback stops, playback will stop immediately .
* You can't overdub during the time until playback stops .
IMMEDIATE Playback will stop immediately .
FADE OUT Playback will fade out and then stop .
LOOP END Playback will continue to the end of the loop, and then stop .
Adjusting the playback level of the Tracks ( Play Level)
100
You can adjust the playback level of the tracks . You can also change this value
with the TRACK [1]–[3] sliders .
0–200 Playback level of the track .
Settings for Each Track
If one-shot playback is
selected, playback will
stop when it reaches the
end of the phrase (it will
not loop) .
17