Editing A Memory; Editing The Settings Of A Memory; Editing The Rhythm Settings - Boss Loop Station RC-5 Reference Manual

Editing a Memory

Editing the Settings of a Memory

Here's how to edit the settings of each memory.
1 .
Select the memory that you want to edit.
2 .
Press the [MEMORY] button.
The memory settings screen appears.
MEMORY
J
LOOP
3 .
Turn the [MEMORY/LOOP LEVEL] knob to select the
item that you want to edit, and press the [MEMORY/
LOOP LEVEL] knob.
J
LEVEL
100
4 .
Turn the [MEMORY/LOOP LEVEL] knob to select
the parameter that you want to edit, and press the
[MEMORY/LOOP LEVEL] knob.
START
J
IMMEDIATE
5 .
Turn the [MEMORY/LOOP LEVEL] knob to change
the value.
6 .
Press the [MEMORY] button to return to the play
screen.
7 .
If you want to save the edited settings, execute the
Write operation (p. 7).
8
Item
Parameter
Value

Editing the Rhythm Settings

* Rhythm parameters can also be edited from the edit screens for
a memory.
1 .
Select the memory for which you want to edit the
rhythm settings.
2 .
Long press the RHYTHM [ON/OFF] button.
The rhythm settings screen appears.
J
LEVEL
100
3 .
Turn the [MEMORY/LOOP LEVEL] knob to select
the parameter that you want to edit, and press the
[MEMORY/LOOP LEVEL] knob.
REVERB
J
50
4 .
Turn the [MEMORY/LOOP LEVEL] knob to change
the value, and press the [MEMORY/LOOP LEVEL]
knob.
5 .
Repeat steps 3–4 to edit the parameter that you
want.
6 .
Long press the RHYTHM [ON/OFF] button to return
to the play screen.
7 .
If you want to save the edited settings, execute the
Write operation (p. 7).
MEMO
By executing the Write operation while in the rhythm play-standby
or rhythm play condition, you can save/recall the memory as a
"rhythm: on" memory.
Parameter
Value