Midi-Related Settings; Midi Receive Channel; Midi Omni Mode; Midi Transmit Channel - Boss RC-300 Loop Station Owner's Manual

System Settings (Settings for the Entire RC-300)

MIDI-Related Settings

Here you can make settings for using the RC-300 connected with an external MIDI device or with a second RC-300 unit .
Reference
For details on MIDI, refer to "Connecting an External MIDI Device or Another RC-300 Unit" (p . 38) .
Parameter
Sys: MIDI Rx Ch
Sys: MIDI Omni
Sys: MIDI Tx Ch
Sys: MIDI Sync
MEMORY
Sys: MIDI PC Out
34
Value Explanation

MIDI Receive Channel

1
1–16 This procedure sets the MIDI channel used for receiving MIDI messages .

MIDI Omni Mode

ON
Messages will be received only on the channel specifi ed by the MIDI Receive Channel
OFF
setting .
Messages are received via all MIDI channels, regardless of the MIDI Receive Channel
ON
settings .

MIDI Transmit Channel

Rx
1–16 This procedure sets the MIDI channel used for transmitting MIDI messages .
Rx The MIDI transmit channel will be the same as the MIDI receive channel .
Synchronizing the Tempo of Two RC-300 Units (MIDI
Sync)
Two RC-300 units can be synchronized after connecting them together using a MIDI cable . For details, refer to
"Connecting Two RC-300 Units" (p . 39) . The "MIDI Sync" setting allows two RC-300 units to play back in synchronization
at the same tempo .
MIDI OUT connector
RC-300 (Master unit)
Reference
For more detailed information about MIDI and synchronization, refer to "MIDI settings" (p . 38) .
MEMORY The RC-300 will use the MIDI sync setting (p . 21) that's specifi ed by the phrase memory .
This RC-300 unit will operate at its own specifi ed phrase memory tempo . Choose the
INTERNAL
"INTERNAL" setting if you're using the RC-300 by itself, or if this is the master RC-300 unit .
This RC-300 unit will synchronize to MIDI data received from the master RC-300 unit .
MIDI
Choose the "MIDI" setting for the slave RC-300 unit .

MIDI Program Change Out

ON
OFF MIDI program change messages will not be transmitted .
ON MIDI program change messages will be transmitted .
MIDI IN connector
RC-300 (Slave unit)