How To Set The On Timer; How To Set The Off Timer; Programming Timer Operation - Harbor Point HF-25GW Installation, Operation And Maintanance Manual

OPERATION SECTION FOR
Remote Control Operation
Press
AUTO
START
Press
to set
hours
Press to set
minutes
HF-25/HF-35 & HFR-25/HFR-35

How to set the ON timer

1) Press the AUTO START button to set the
ON timer mode during operation. Each
time the button is pressed, the ON timer
mode alternates between ON and OFF.
2) Set the time on the timer using the HOUR
and MIN buttons.
• Each time the HOUR button is pressed,
the timer hours are increased by 1 hour.
• Each time the "MIN" button is pressed,
the timer minutes are increased by 10
minutes.
3) To release the ON timer, press the AUTO
START button again.

How to set the OFF timer

1) Press the AUTO STOP button to set the
OFF timer mode during operation. Each
time the button is pressed, the OFF timer
mode alternates beteen ON and OFF.
2) Set the time on the timer using the HOUR
and MIN buttons.
• Each time the HOUR button is pressed,
the set time is increased by 1 hour.
• Each time the "MIN" button is pressed,
the set time minutes are increased by
10 minutes.
3) To release the OFF timer, press the AUTO
STop button again.

Programming timer operation

The ON timer and OFF timer can be used in
combination. The set time which is reached
first will operate first (
order of timer operations.)
Note: If the current time has not been set, the
timer operation cannot be accomplished.
23
mark indicates the