Temperature Adjustment In Auto Select Mode; Cool/Heat & Fan/Dry Mode - Harbor Point HF-25GW Installation, Operation And Maintanance Manual

OPERATION SECTION FOR
Remote Control Operation

Temperature adjustment in AUTO SELECT mode

To adjust the air temperature during AUTO SELECT
mode, point the remote control toward the indoor air
conditioning unit:
1) Press the
temperature 1°C or 1°F.
2) Press the
point temperature 1°C or 1°F.
COOL/HEAT & FAN/DRY mode
Point the remote control toward the indoor air condition-
ing unit:
1) Press the ON/OFF
2) Press the MODE
operation; COOL, DRY, HEAT/FAN or AUTO.
3) Press the
perature.
Heat
64°F- 88°F
(16°C-31°C)
Once minimum or maximum setting is reached
operation will be continued by
pressing
4) Press the FAN SPEED
sired air flow rate.
Press the ON/OFF
Notes:
• In the COOLING-ONLY operation, the HEAT
mode will disable, and it will go to FAN mode.
• The settings can be changed even while the air
conditioner is off.
button once. To raise the set point
button once, to reduce the set
button.
button, select the mode of
or to set the desired tem-
Cool
64°F- 88°F
(16°C-31°C)
or
button to set the de-
button again to stop.
HF-25/HF-35 & HFR-25/HFR-35
20