To The Installer; Safety Instructions - Harbor Point HF-25GW Installation, Operation And Maintanance Manual

HARBOR POINT WALL SPLIT DUCTLESS SYSTEMS
INSTALLATION, OPERATION AND MAINTENANCE MANUAL
This manual is intended as an aid to a qualified service personnel for proper
installation, operation, and maintenance of Harbor Point Air high efficiency R-410A
Wall Split Ductless Systems. Carefully read these instructions before attempting
installation or operation. Failure to follow these instructions may result in improper
installation, operation, or maintenance, possibly resulting in fire, electrical shock,
property damage, personal injury, or death.
Shipping Damage MUST be Reported to the Carrier IMMEDIATELY!!!
Examine the carton for signs of damage if any is evident open packaging and

TO THE INSTALLER

(1) Retain this manual for future reference.
(2) Before leaving the premises, review this
manual to be sure the unit has been
installed correctly and run the unit for
one complete cycle to make sure it
functions properly.
To obtain technical service or warranty
assistance during or after the installation
of this unit, check our website at
www.harborpointac.com
installing contractor or distributor. Our
technical service department may be
contacted at 1-888-908-9888.
When calling for assistance, please have
the following information ready:
• Indoor Unit
Model Number
• Indoor Unit
Serial Number
• Outdoor Unit
Model Number
• Outdoor Unit
Serial Number
• Date of installation
check the unit for shipping damage.
or call your

SAFETY INSTRUCTIONS

Read all instructions before using
the Harbor Point high efficiency
system. Install or locate this sys-
tem only in accordance with these
instructions. Use this system only
for its intended use as described in
this manual.
Check rating plate for correct system
voltage before installing. Installa-
tion and operation of a system with
the incorrect voltage may result in
malfunction or other issues and will
void the warranty.
The Harbor Point system must be
connected only to a properly
grounded electrical supply. Do not
fail to properly ground this unit.
Turn off the electrical supply before
servicing the Harbor Point system.
Do not use the Harbor Point
system if it has damaged wiring, is
not working properly, or has been
damaged or dropped.
[Save These Instructions]
This symbol is an indication of
!
Important Safety Information.
2
!