Change Baudrate; Power Up Mode; How To Change That Address; What Can Be Set Up - Barco R9002384 Owner's Manual

How to change that address ?

To change that address, handle as follow :
1. Push the cursor key é or ê to highlight 'Change Projector Address' (menu 1).
2. Press ENTER to select.
The Change Projector Address menu (menu 2) will be displayed and the actual address will be filled in. The first digit is highlighted.
3. Push the cursor key ç or è to select the digit to be changed.
4. Reprogram with the digit keys on the RCU.
5. Press ENTER to confirm.
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS

CHANGE BAUDRATE

POWER UP MODE : operating
BARCO LOGO
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Change Baudrate

What can be set up ?

The communication speed between projector and computer has 8 possible speeds. The baud rate speed can be software set up.
The following baud rates are available :
- 9600, 4800, 2400, 1200, 600, 300, 150, 110
How to set up ?
To set up the baudrate :
1. Push the cursor key é or ê to highlight 'Change Baudrate' (menu 1).
2. Press ENTER to select.
The actual baud rate will be highlighted (menu 2)
3. Push the cursor key é or ê to select the desired baudrate.
4. Press ENTER to accept.
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1

Power up mode

What can be done ?
When pressing the power switch, the projector can start up in 'operating mode' or in 'stand-by mode'.
Operating mode : the projector start up and displays image .
Stand-by mode : the projector start up in stand-by and waits until the stand-by button or a digit key is pressed.
5976197 BARCOCINE 7 10012001
PROJECTOR ADDRESS
Enter new projector
address :
0 0 0
Use ç and è to select,
and reprogram
with numeric keys.
Highest address is 255
<ENTER> to confirm
<EXIT> to return.
menu 2
BAUDRATE
Select new
baudrate :
9600 4800
2400 1200
600 300
150 110
Select with arrow
keys ;
<ENTER> to accept
<EXIT> to return.
menu 2
Service Mode
8-5