Outer/Left Rear Panel - HP Compaq 6000 Pro Maintenance & Service Manual

Outer/Left Rear Panel

The outer/left rear panel is secured with two screws. You must pry it off at the seams around the edges
of the computer.
To remove the outer/left rear panel:
1. Prepare the computer for disassembly (see
2. Remove the small rear cover (see
3. Remove the port cover (see
4. Remove the stand (see
5. Remove the drive cover (see
6. Remove the memory cover (see
7. Remove the upper rear panel (see
8. Remove the I/O panel (see
9. Remove the three screws that secure the panel to the computer.
Figure 7-33
Small Rear Cover on page
Port Cover on page
Stand on page
Optical Drive on page
Memory on page
Upper Rear Panel on page
Rear I/O Cover on page
Removing the outer/left rear panel screws
Preparing to Disassemble the Computer on page
44).
45).
46).
47).
53).
67).
55).
Outer/Left Rear Panel
43).
75