Arris Touchstone TM822 User Manual page 15

Getting
Safety Started
Battery
Opening
Hinge Tabs
Battery
Installation Installation
3
4
Receiver
Slots
Touchstone TM822 Telephony Modem User's Guide
Ethernet
Configuration Usage
Push the battery pack into the bay until it seats into place. If you are tak-
ing the battery out of the Telephony Modem, position your finger in
the battery opening area and use leverage to dislodge the battery
while pulling it straight back.
Note: The Telephony Modem will not begin operating until you apply AC
power.
Replace the door. To do so, place the hinge tabs of the battery door into the
receiver slots inside the Telephony Modem battery compartment on the
opposite end of the battery opening slot. Rotate the door toward the unit
until the latch snaps back into place.
Note: Telephony Modems use a Lithium-Ion battery pack. Please recycle or
dispose of the battery responsibly and in accordance with local ordinances.
Troubleshooting Glossary
15