Safety Requirements - Arris Touchstone TM822 User Manual

Getting
Safety Started
Battery
Installation Installation

Safety Requirements

ARRIS Telephony Modems comply with the applicable requirements for perform-
ance, construction, labeling, and information when used as outlined below:
•
•
•
•
Touchstone TM822 Telephony Modem User's Guide
Ethernet
Configuration Usage
CAUTION
Risk of shock
Mains voltages inside this unit. No user serviceable parts inside. Refer
service to qualified personnel only!
CAUTION
Potential equipment damage
Potential loss of service
Connecting the Telephony Modem to existing telephone wiring should
only be performed by a professional installer. Physical connections to
the previous telephone provider must be removed and the wiring must
be checked; there must not be any voltages. Cancellation of telephone
service is not adequate. Failure to do so may result in loss of service
and/or permanent damage to the Telephony Modem.
CAUTION
Risk of explosion
Replacing the battery with an incorrect type, heating a battery above
75°C, or incinerating a battery, can cause product failure and a risk of
fire or battery explosion. Do not disassemble. Do not dispose of in fire.
Keep away from children. Recycle or dispose of used batteries respon-
sibly and in accordance with local ordinances.
The Telephony Modem is designed to be connected directly to a telephone.
Connecting the Telephony Modem to the home's existing telephone wiring
should only be performed by a professional installer.
Do not use product near water (i.e. wet basement, bathtub, sink or near a
swimming pool, etc.), to avoid risk of electrocution.
Do not use the telephone to report a gas leak in the vicinity of the leak.
Troubleshooting Glossary
3