Display Assembly; Removing The Display Assembly - Toshiba Satellite L350 Maintenance Manual

4 Replacement Procedures

4.8 Display Assembly

Removing the Display Assembly

CAUTION: Use care to avoid that the antenna cable is not caught between the display
assembly and computer.
Remove the display assembly according to the following procedures and Figures 4-14, 4-15.
1. Turn the computer so the back is facing you and remove two M2.5x7 black flat head
screws.
2. Restore the normal computer placement and open the display panel.
Figure 4-14 Removing the screws from the back of the computer
3. Disconnect the LCD/FL cable from CN5 on the system board.
4. Disconnect the CCD cable from CN7 on the system board.
5. Disconnect the MIC cable from CN3 on the system board.
6. Remove four M2.5x7 black flat head screws securing the LCD module to the bottom
cover.
7. Remove the wireless antenna cables, CCD cable and MIC from the bottom cover.
8. Remove the display module.
4-30
Satellite L350/ Satellite Pro L350/ EQUIUM L350/ SATEGO L350 Maintenance Manual

4.7 Display Assembly

M2 5x7 black flat head screw .