Toshiba Satellite L350 series User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite L350 series
  6. User manual

Toshiba Satellite L350 series User Manual

Notebook
Hide thumbs Also See for Satellite L350 series:
Table of Contents

Advertisement

Quick Links

See also: Maintenance Manual
TOSHIBA
Satellite L350/
Satellite Pro L350/
Satellite L350D/
Satellite Pro L350D series
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite L350 series

Summary of Contents for Toshiba Satellite L350 series

  • Page 1 TOSHIBA Satellite L350/ Satellite Pro L350/ Satellite L350D/ Satellite Pro L350D series User’s Manual...
  • Page 2 © 2008 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior writ- ten permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.

  • Page 3: Safety Instructions

    DVD MovieFactory is trademarks of the Ulead Systems. Inc. Labelflash™ is a trademark of YAMAHA CORPORATION. Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No's. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 and other U.S. and world-wide patents issued and pending. "DTS" and "DTS Digital Surround"...

  • Page 4: Fcc Information

    ■ Use only the AC adaptor and batteries that are approved for use with this computer. Use of another type of battery or AC adaptor may risk fire or explosion. ■ Before you connect the computer to a power source, ensure that the voltage rating of the AC adaptor matches that of the available power source.

  • Page 5: Fcc Conditions

    Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s external monitor port, USB port, and...
  • Page 6 Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causng Equipment Regulations.

  • Page 7: Region Selection

    Japan regulations Region selection If you are using the computer in Japan, technical regulations described in the Telecommunications Business Law require that you select the Japan region mode. It is illegal to use the modem in Japan with any other selection.

  • Page 8: Type Of Service

    FCC. In the event repairs are ever needed on your modem, they should be performed by TOSHIBA Corporation or an authorized representative of TOSHIBA Corporation.
  • Page 9 Instructions for IC CS-03 certified equipment The Industry Canada label identifies certified equipment. This certifica- tion means that the equipment meets certain telecommunications net- work protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements docu- ment(s).
  • Page 10 Notes for users in Australia and New Zealand Modem warning notice for Australia Modems connected to the Australian telecoms network must have a valid Austel permit. This modem has been designed to specifically configure to ensure compliance with Austel standards when the country/region selection is set to Australia.
  • Page 11 (b) the application using the modem is compatible with the applica- tion at the other end of the call - e.g., accessing the Internet requires suitable software in addition to a modem. ■ This equipment shall not be used in any manner which could constitute a nuisance to other Telecom customers.

  • Page 12: General Conditions

    Note that where DTMF dialing is used, the numbers should be entered normally. ■ The transmit level from this device is set at a fixed level and because of this there may be circumstances where the performance is less than optimal.
  • Page 13 ENERGY STAR logo on the computer and the following information applies. TOSHIBA is a partner in the Environmental Protection Agency's (EPA) ENERGY STAR ® Program and has designed this computer to meet the ®...

  • Page 14: Optical Disc Drive Safety Instructions

    Optical disc drive standards TOSHIBA Satellite L350/Satellite Pro L350/Satellite L350D/Satellite Pro L350D series computer is shipped with one of the following drives preinstalled:CD-RW/DVD-ROM DVD Super Multi (+-R DL), DVD Super Multi (+-R DL) /w Label Flash, HD DVD-ROM, HD DVD-R, or HD DVD-RW drive.
  • Page 15 PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT THE DATE OF MANUFACTURE. MANUFACTURED Toshiba Samsung Strage Technology Korea corporation 416, Maetan-3Dong, Yeongtong-Gu Suwon City, Gyeonggi-Do, 443-742, Korea TEAC DW-224E Location of the required label...
  • Page 16 DVD Super Multi (+-R DL) drive Panasonic UJ-870B/UJ-870F Location of the required label COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J. MANUFACTURED Panasonic Communications Co., Ltd. 1-62, 4-Chome Minoshima Hakata-ku Fukuoka, Japan HLDS GSA-T40N/GSA-T40F Location of the required label COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.
  • Page 17 PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULES 21 CFR CHAPTER 1, SUBCHAPTER J, APPLICABLE AT THE DATE OF MANUFACTURE. MANUFACTURED Toshiba Samung Storage Technology Korea Corporation 416, Maetan-3Dong, Yeongtong-Gu, Suwon City, Gyeonggi-Do, 443-742, Korea User’s Manual...
  • Page 18 HD DVD-ROM drive Toshiba SD-L802B Location of the required label PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULES 21 CFR CHAPTER1, SUBCHAPTER J, APPLICABLE AT THE DATE OF MANUFACTURE. MANUFACTURED TOSHIBA CORPORATION 1-1-1, SHIBAURA, MINATO-KU, TOKYO 105-8001, JAPAN...
  • Page 19 International precautions CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.”...

  • Page 20: Important Notice

    Dispose of used batteries according to the manufacturer’s instructions. Use only the battery pack that came with the computer or an optional battery pack. Use of wrong battery could damage your computer. TOSHIBA assumes no liability for any damage in such case. User’s Manual...

  • Page 21: Table Of Contents

    Special features ......... 1-11 TOSHIBA Value Added Package ......1-13 Utilities and applications .
  • Page 22 Notes on playing HD DVD video discs ..... . . 4-7 Using TOSHIBA HD DVD PLAYER ......4-10 Starting TOSHIBA HD DVD PLAYER .
  • Page 23 TOSHIBA Disc Creator ........4-30...
  • Page 24 The Keyboard Chapter 5 Typewriter keys......... . . 5-1 Function keys: F1 …...
  • Page 25 ExpressCard ..........8-2 Installing an ExpressCard .
  • Page 26 TOSHIBA support ........

  • Page 27: Preface

    Preface Congratulations on your purchase of the TOSHIBA Satellite L350/Satellite Pro L350/Satellite L350D/Satellite Pro L350D series computer. This power- ful, lightweight notebook computer is designed to provide years of reliable, high-performance computing. This manual tells how to set up and begin using your Satellite L350/Satellite Pro L350/Satellite L350D/Satellite Pro L350D series computer.
  • Page 28 Preface Chapter 6, Power and Power-up Modes, gives details on the computer’s power resources and battery save modes. Chapter 7, HW Setup and Passwords, explains how to configure the computer using the HW Setup program. It also tells how to set a password. Chapter 8, Optional Devices, describes the optional hardware available.
  • Page 29 Preface Display Names of windows or icons or text generated by the computer that appear on its display screen are presented in the typeface you see to the left. Messages Messages are used in this manual to bring important information to your attention.

  • Page 30: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.

  • Page 31: Instruction Manual For Safety And Comfort

    General Precautions Heat injury ■ Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury.

  • Page 32: Equipment Checklist

    Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packaging materials for future use.

  • Page 33: Software

    TOSHIBA CD/DVD Drive Acoustic Silencer ■ TOSHIBA ConfigFree ■ TOSHIBA Disc Creator ■ TOSHIBA DVD PLAYER (Is preinstalled with DVD Super Multi (+-R DL) drive model) ■ TOSHIBA HD DVD PLAYER (Is preinstalled with HD DVD-ROM drive or HD DVD-RW drive model) ■...

  • Page 34: Memory

    Introduction Memory Slots PC2-5300 512 MB, 1024 MB or 2048 MB memory modules can be installed in the two memory slots. Maximum system memory size and speed depend on the model you purchased. PC2-5300 memory module works as PC2-4200 speed on GL960 Express chipset. Video RAM Depending on the model you purchased.
  • Page 35 Introduction Some models are equipped with a full-size, CD- CD-RW/DVD-ROM RW/DVD-ROM drive module that allows you to drive run CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed. It writes CD-R at up to 24 speed and CD-RW at up to 24 speed.
  • Page 36 Introduction Some models are equipped with a full-size DVD DVD Super Multi (+-R Super Multi (+- R DL) drive module that allows DL) drive you to record data to rewritable CD/DVDs as well as run CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CD- ROMs at maximum 24 speed.
  • Page 37 Introduction Some models are equipped with a full-size HD HD DVD-ROM drive DVD-ROM drive module that allows you to run CD/DVD/HD DVDs without using an adaptor. The drive reads DVD-ROMs at a maximum 8x speed, CD-ROMs at a maximum 24x speed, and HD DVDs at a maximum 1x speed.
  • Page 38 Introduction Some models are equipped with a full-size HD HD DVD-RW drive DVD-RW drive module that allows you to run CD/DVD/HD DVDs without using an adaptor. The drive reads DVD-ROMs at a maximum 8x speed, CD-ROMs at a maximum 24x speed, and HD DVD-ROMs at a maximum 2.4x speed.

  • Page 39: Keyboard

    Introduction Keyboard ® Built-in 104 keys or 105 keys, compatible with IBM enhanced keyboard, keys. See Chapter 5, Keyboard, for details. Pointing device A touchpad and control buttons in the palm rest Built-in enable control of the on-screen pointer. Power The computer is powered by one rechargeable Battery pack lithium-ion battery pack.

  • Page 40: Slots

    Introduction Slots This slot allows you to easily transfer data from Multiple digital media devices, such as digital cameras and Personal card slot Digital Assistants, that use flash memory (SD/SDHC/MS/MS Pro/MMC memory cards). (Provided with some models) ExpressCard slot allows you to install an ExpressCard slot ExpressCard™/34 or Expres Card™/54 to expand functionality.

  • Page 41: Security

    Windows Vista™ is available. Refer to the preinstalled Software section at the front of this chapter. TOSHIBA Utilities A number of utilities and drivers are preinstalled to make your computer more convenient to use. Refer to the Utilities and applications section in this chapter.

  • Page 42: Special Features

    Introduction Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. To access the Power Options, click Start → Control Panel → System and Maintenance → Power Options.
  • Page 43 Introduction Low battery When battery power is exhausted to the point automatic that computer operation cannot be continued, the hibernation mode system automatically enters hibernation and shuts down. This can be specified in the Power Options. Heat dispersal To protect from overheating, the CPU has an internal temperature sensor.

  • Page 44: Toshiba Value Added Package

    ■ TOSHIBA utility launcher function ■ When you start or resume your computer, the TOSHIBA Flash Cards may take a moment to become available and may display several times before completely activating. The hot key functions will be available once the TOSHIBA Flash Cards are completely active.

  • Page 45: Utilities And Applications

    TOSHIBA Assist TOSHIBA Assist is a graphical user interface that provides easy access to help and services. HW Setup utility To start the utility, click the Windows Start button, point to All Programs, click TOSHIBA, click Utilities, and select HWSetup icon.
  • Page 46 Labelflash function. ® MovieFactory TOSHIBA TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication device and network connections. ConfigFree also allows you to find communication problems and create profiles for easy switching between location and communication networks.

  • Page 47: Options

    An additional battery pack 6 cell Type (PA3536U- 1BRS/ PA3536U-1BAS) and 9 cells Type (PA3537U-1BRS/ PA3537U-1BAS) can be purchased from your TOSHIBA dealer. The battery pack is identical to the one that came with your computer. Use it as a spare or replacement.

  • Page 48: Chapter 2 The Grand Tour

    Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed Figure 2-1 shows the computer’s front with its display panel in the closed position.
  • Page 49 The Grand Tour Front edge logo indicates the computer series Front edge logo you bought. (Depends on the model you purchased.) Slide this switch toward the right of the computer Wireless to turn on Wireless communication. Slide it communication toward the left of the computer to turn off the switch functions.

  • Page 50: Left Side

    The Grand Tour Left side Figure 2-2 shows the computer’s left side. JACK AN VENT XPRESS ARD SLOT XTERNAL MONITOR PORT PORTS HDMI OUT PORT EPENDING ON THE MODEL YOU PURCHASED Figure 2-2 The left side of the computer This 15-pin port allows you to connect an external External monitor monitor.

  • Page 51: Right Side

    The Grand Tour Universal serial The two universal serial bus (USB) ports comply bus (USB 2.0) with USB Serial 2.0 standards, which enables ports data transfer speeds 40 times faster than the USB 1.1 standards. (The ports also support USB 1.1) Keep foreign objects out of the USB connectors.

  • Page 52: Back Side

    The Grand Tour Keep foreign objects out of the USB connectors. A pin or similar object can damage the computer’s circuitry. Operation of all functions of all USB devices has not been confirmed. some functions might not execute properly. Optical disc drive A CD-RW/DVD-ROM drive, DVD super multi drive, a HD DVD-ROM drive, or a HD DVD-RW drive.

  • Page 53: Underside

    Chapter 6, Power and Power-up Modes, describes how to access the battery pack. Additional battery packs can be purchased from your TOSHIBA dealer to extend the computer’s battery operating time. Battery release Slide this latch to release the battery pack.

  • Page 54: Front With The Display Open

    The Grand Tour Front with the display open Figure 2-6 shows the front of the computer with the display open. To open the display, lift the display up and position the display at a comfortable viewing angle. UILT IN MICROPHONE EB CAMERA EB CAMERA LED ISPLAY SCREEN...

  • Page 55: Function Button

    The Grand Tour Touch pad Moves the pointer and selects or activates items on the screen. Can be set to perform other mouse functions, such as scrolling, selecting, and double-clicking. Touch pad Function like the left and right buttons on an control buttons external mouse.

  • Page 56: System Indicators

    The Grand Tour These buttons allow you to manage audio/video, run applications and access utilities. Refer to the Function Button section in Chapter 4, Operating Basics for details. Press this button to turn off the sound. Mute button Press this button to launch an application CD/DVD/HD DVD program that allows Windows Media Player / button...
  • Page 57 The Grand Tour DC IN The DC IN indicator glows green when DC power is supplied from the AC power adaptor. If the adaptor’s output voltage is abnormal or if the power supply malfunctions, this indicator shows no light. The Power indicator glows green when the Power computer is on.

  • Page 58: Keyboard Indicators

    The Grand Tour Keyboard indicators The figures below show the position of the CAPS LOCK indicator. When the CAPS LOCK indicator glows the keyboard is in all-caps mode. CAPS LOCK INDICATOR Figure 2-8 CAPS LOCK indicator CAPS LOCK This indicator glows green when letter keys are locked into their uppercase format.

  • Page 59: Region Codes For Dvd Drives And Media

    The Grand Tour Notes on use ■ Because HD DVD is a new format there is a possibility of new features being added at a later date. As such, it is important that the purchaser understands that software and other updates may be necessary after purchase.

  • Page 60: Writable Discs

    This section describes the types of writable CD/DVD/HD DVD discs. Check the specifications for your drive to for the type of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Refer to Chapter 4, Operating Basics ■...

  • Page 61: Cd-Rw/Dvd-Rom Drive

    The Grand Tour CD-RW/DVD-ROM drive The full-size CD-RW/DVD-ROM drive module allows you to record data to rewritable CDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the outer edge.

  • Page 62: Hd Dvd-Rom Drive

    The Grand Tour HD DVD-ROM drive The full-size HD DVD-ROM drive module allows you to record data to rewritable CDs as well as run either 12 cm (4.72") HD DVD,12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the outer edge.

  • Page 63: Hd Dvd-Rw Drive

    The Grand Tour HD DVD-RW drive The full-size HD DVD-RW drive module allows you to record data to rewrit- able CDs as well as run either 12 cm (4.72") HD DVD,12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the outer edge.

  • Page 64: Ac Adaptor

    Figure 2-9 The AC adaptor (2-pin plug) Figure 2-10 The AC adaptor (3-pin plug) ■ Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC.

  • Page 65: Chapter 3 Getting Started

    Chapter 3 Getting Started This chapter provides basic information to start using your computer. It covers the following topics: Be sure also to read Instruction Manual for Safety and Comfort. This guide, which is included with the computer, explains product liability. ■...

  • Page 66: Connecting The Ac Adaptor

    Chapter 6, Power and Power-up Modes. Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC.

  • Page 67: Opening The Display

    Getting Started Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. To open the display, slide the latch to the right side and lift the panel up to the best viewing angle. When you open the display, be sure to hold the base firmly and lift up the monitor slowly.

  • Page 68: Starting Up For The First Time

    Getting Started Starting up for the first time When you first turn on the power, the computer’s initial screen is the Microsoft ® Windows Vista™ Startup Screen Logo. Follow the on-screen directions. Turning off the power The power can be turned off in one of three modes:shut down (Boot) , hibernation mode or sleep mode.

  • Page 69: Starting Hibernation Mode

    Getting Started For the computer to shut down in hibernation mode, the hibernation feature must be enabled in the Hibernate tab in Power Options. Otherwise, the computer will shut down in sleep mode. If battery power becomes depleted, data saved in sleep mode will be lost. ■...

  • Page 70: Sleep Mode

    Getting Started Sleep mode In sleep mode the power remains on, but the CPU and all other devices are in sleep mode. ■ Before entering sleep mode, be sure to save your data. ■ Do not install or remove a memory module while the computer is in sleep mode.

  • Page 71: Restarting The Computer

    Getting Started Restarting the computer Certain conditions require that you reset the computer, for example, if: ■ You change certain computer settings. ■ An error occurs and the computer does not respond to your keyboard commands. If you need to restart the computer, there are three ways this can be achieved: 1.

  • Page 72: System Recovery Options

    Getting Started System recovery options About 1.5 GB hidden partition is allocated on the hard disk drive for the system recovery options. This partition stores files which can be used to repair the system in the event of a problem. System recovery options The system recovery options feature is installed on the hard disk when shipped from the factory.

  • Page 73: Restoring The Preinstalled Software From The Recovery Hdd

    1. Load the Recovery Media in the optional optical disc drive and turn off the computer's power. 2. Hold down the F12 key and turn on the power. When TOSHIBA >>> appears, release the F12 key. Leading Innovation 3. Use the up or down cursor key to select CD/DVD in the display menu.
  • Page 74 Getting Started When removing pre-installed drivers/utilities or when installing, you can setup the respective drivers/utilities from the following folder. C:\TOSAPINS\*** User’s Manual 3-10...

  • Page 75: Chapter 4 Operating Basics

    Chapter 4 Operating Basics This chapter gives information on basic operations including using the touchpad, optical disc drives, Audio/Video controls, the web camera, the microphone, the internal modem, wireless communication and LAN. It also provides tips on caring for your computer, and CD/DVD/HD DVDs. Using the touchpad To use the touchpad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go.

  • Page 76: Using Optical Disc Drives

    DVD Super Multi (+-R DL) drive model) ■ Use the TOSHIBA HD DVD PLAYER application to view DVD-Video discs or HD DVD-Video discs.(HD DVD-ROM model or HD DVD-RW drive model) If you have a CD-RW/DVD-ROM drive, refer to the...

  • Page 77: Loading Discs

    Operating Basics Loading discs To load CD/DVD/HD DVDs, follow the steps below and refer to figures. 1. a. When the power is on, press the eject button to open the drawer slightly. JECT BUTTON Figure 4-2 Pressing the eject button b.
  • Page 78 Operating Basics 2. Grasp the drawer gently and pull until it is fully opened. Figure 4-4 Pulling the drawer open 3. Lay the CD/DVD/HD DVD, label side up, in the drawer. Figure 4-5 Inserting a CD/DVD/HD DVD When the drawer is fully opened, the edge of the computer will extend slightly over the CD/DVD/HD DVD tray.

  • Page 79: Removing Discs

    Operating Basics 4. Press gently at the center of the CD/DVD/HD DVD until you feel it click into place. The CD/DVD/HD DVD should lie below the top of the spindle, flush with the spindle base. 5. Push the center of the drawer to close it. Press gently until it locks into place.

  • Page 80: Function Button

    Operating Basics 2. The CD/DVD/HD DVD extends slightly over the sides of the drawer so you can grasp it. Hold the CD/DVD/HD DVD gently and lift it out. Figure 4-7 Removing a CD/DVD/HD DVD 3. Push the center of the drawer to close it. Press gently until it locks into place.

  • Page 81: Using Toshiba Hd Dvd Player To Enjoy Hd Dvds

    HD DVD playback restrictions HD DVD-ROM drive and HD DVD-RW drive model allow users to enjoy the strong visuals of HD DVD Video. TOSHIBA HD DVD PLAYER software is provided for playback of HD DVD Video. Notes on use HD DVD playback ■...
  • Page 82 DVD playback or television program recording errors. Please view HD DVD Video during times when there is no recording pre-scheduled. ■ The resume function cannot be used with some discs on the TOSHIBA HD DVD PLAYER. ■ Make sure to connect the computer's AC adaptor when using the TOSHIBA HD DVD PLAYER.

  • Page 83: Toshiba Hd Dvd Player

    Dualview modes) on the computer's display panel and an external display or television. ■ Do not change the screen resolution while running the TOSHIBA HD DVD PLAYER. ■ Audio data of more than 48 kHz/16 bit will be down sampled to 48 kHz/16 bit.

  • Page 84: Using Toshiba Hd Dvd Player

    HD DVD drive, the following application selection screen may appear. If this occurs, select Play HD DVD movie or Run the HD DVD Launcher, then click OK to launch the TOSHIBA HD DVD PLAYER. Figure 4-9 Application selection screen 2.
  • Page 85 INIMIZE ISPLAY AREA TOSHIBA HD DVD PLAYER c ONTROL WINDOW Figure 4-10 TOSHIBA HD DVD PLAYER windows Displays video. Double click on the Display Area Display Area to toggle full screen display mode on and off. Click the Display Area to display the Control window when it isn't displayed.

  • Page 86: Open Toshiba Hd Dvd Player Help

    "TOSHIBA HD DVD PLAYER control window" section for more information. Open TOSHIBA HD DVD PLAYER HELP TOSHIBA HD DVD PLAYER features and instructions are also explained in detail in TOSHIBA HD DVD PLAYER Help. Click the Help button( ) in the Display Area to open TOSHIBA HD DVD PLAYER Help.
  • Page 87 TOUCH REPLAY CHAPTER Next chapter AUSE LOW MOTION FORWARD REWIND Figure 4-12 TOSHIBA HD DVD PLAYER control window (2) Opens the disc tray. Eject Jumps to the previous chapter. Previous chapter Jumps to the next chapter. Next chapter Stops a HD DVD currently being run.
  • Page 88 EPEAT ETURN ITLE HAPTER RIVE SPECIFICATION SEARCH Figure 4-13 TOSHIBA HD DVD PLAYER control window (3) Switches between available subtitles. Subtitle Switches between audio tracks for titles which Sound have more than 1 audio track. Switches between angles for multi-angle Angle compatible titles.

  • Page 89: Using The Computer In Place Of A Hd Dvd Player

    Operating Basics Using the computer in place of a HD DVD Player Videos played using TOSHIBA HD DVD PLAYER included with the computer can be displayed on a television equipped with a HDMI input port. HD DVD-Video can only be displayed on the computer's display panel or on a television connected to the HDMI out port.

  • Page 90: Switching Between Computer And Television Display

    The following is a HD DVD-Video display compatibility list. O:The display of TOSHIBA HD DVD PLAYER is possible. X:The display of TOSHIBA HD DVD PLAYER is impossible. When using TOSHIBA HD DVD PLAYER...

  • Page 91: Writing Cds On Cd-Rw/Dvd-Rom Drive

    CD-RW: MITSUBISHI KAGAKU MEDIA CO., LTD Ricoh Co., Ltd. ■ TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. ■ CD-RW can generally be rewritten about 1,000 times. However, the actual number of rewrites is affected by the quality of the media and the way it is used.

  • Page 92: When Writing Or Rewriting

    Write from the computer’s HDD to the CD. Do not try to write from shared devices such as a LAN server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator has not been confirmed. Therefore, operation with other software cannot be guaranteed.

  • Page 93: Disclaimer (Cd-Rw/Dvd-Rom Drive)

    Based on TOSHIBA’s limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/- RAM/+R DL/-R DL disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates User’s Manual...
  • Page 94 Operating Basics CD-R: TAIYO YUDEN CO., LTD. MITSUBISHI KAGAKU MEDIA CO., LTD Ricoh Co., Ltd. CD-RW: (High-Speed, Multi-Speed) MITSUBISHI KAGAKU MEDIA CO., LTD CD-RW: (Ultra-Speed) MITSUBISHI KAGAKU MEDIA CO., LTD DVD-R: DVD Specifications for DVD-R Disc for General Version 2.0 Matsushita Electric Industrial Co., Ltd.
  • Page 95 Operating Basics ■ This DVD Super Multi (+-R DL) drive cannot use discs that allow writing faster than 8x speed (DVD-R, DVD+R and DVD+RW media), 6x speed (DVD-RW media), 5x speed (DVD-RAM media) and 4x speed (DVD-R DL and DVD+R DL media). ■...

  • Page 96: When Writing Or Rewriting

    Write from the computer’s HDD to the CD/DVD. Do not try to write from shared devices such as a LAN server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator is not recommended. When writing or rewriting Please observe/consider the following when you write or rewrite to a CD- R/RW, DVD-R/-R DL/-RW/-RAM or DVD+R/+R DL/+RW disc.

  • Page 97: Disclaimer (Dvd Super Multi (+-R Dl) Drive/Hd Dvd-Rom Drive)

    Some models are equipped with a full-size HD DVD-RW drive which can be used to write data to either CD-R or CD-RW, DVD-R, DVD-R DL, DVD- RW, DVD+R, DVD+R DL, DVD-RAM, HD DVD-R, HD DVD-R DL, HD DVD-RW discs. This computer is provided with TOSHIBA Disc Creator and Ulead ®...

  • Page 98: Important Message (Hd Dvd-Rw Drive)

    Before writing or rewriting Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R, CD-RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW, DVD-RAM, HD DVD-R, HD DVD-R DL or HD DVD- RW media, however, it must be noted that disc quality can affect write or rewrite success rates.
  • Page 99 Operating Basics CD-R: MITSUBISHI KAGAKU MEDIA CO., LTD. TAIYO YUDEN CO., LTD. RICOH CO., LTD. CD-RW: MITSUBISHI KAGAKU MEDIA CO., LTD. CD-RW: (High-Speed) MITSUBISHI KAGAKU MEDIA CO., LTD. CD-RW: (Ultra-Speed) MITSUBISHI KAGAKU MEDIA CO., LTD. DVD-R:0 DVD Specifications for DVD-R Disc for General Version 2.0 Matsushita Electric Industrial Co., Ltd.
  • Page 100 Operating Basics HD DVD-R: HITACHI MAXELL, LTD. MITSUBISHI KAGAKU MEDIA CO., LTD. HD DVD-R DL: MITSUBISHI KAGAKU MEDIA CO., LTD. HD DVD-RW: RITEK Corporation. ■ This drive cannot use discs that allow writing faster than 4x speed (DVD-R, DVD+R, DVD-RW and DVD+RW media), 3x speed (DVD- RAM media), 2.4x speed (DVD+R DL media), 2x speed (DVD-R DL and HD DVD-R media) and 1x speed(HD DVD-R DL and HD DVD-RW media).
  • Page 101 Operating Basics ■ If the disc is poor in quality, or is dirty or damaged, writing or rewriting errors may be noted - ensure that you check all discs for dirt or damage before you use them. ■ The actual number of rewrites to CD-RW, DVD-RW, DVD+RW, DVD- RAM or HD DVD-RW media will be affected by the quality of the disc itself and the way in which it is used.
  • Page 102 CD/DVD/HD DVD - do not try to write from shared devices such as a server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator has not been confirmed, therefore operation with other software applications cannot be guaranteed.

  • Page 103: When Writing Or Rewriting

    Operating Basics When writing or rewriting Please observe the following points while you write or rewrite data to CD-R, CD-RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW, DVD-RAM, HD DVD-R, HD DVD-R DL or HD DVD-RW media: ■ Always copy data from the hard disk drive to the optical disc - do not use the cut-and-paste function as the original data will be lost if there is a write error.

  • Page 104: Toshiba Disc Creator

    CD Player' function to record music to DVD-R, DVD-R DL,DVD-RW, DVD+R, DVD+R DL, DVD+RW, HD DVD-R or HD DVD-RW media. ■ Do not use the 'Disc Backup' function of TOSHIBA Disc Creator in order to copy DVD Video, DVD-ROM, HD DVD-R or HD DVD-RW material that has copyright protection.

  • Page 105: Data Verification

    3. Select File Open or Full Compare mode. 4. Click the OK button. How to learn more about TOSHIBA Disc Creator Please refer to the Help files for additional TOSHIBA Disc Creator information. Video You can record video using Ulead DVD MovieFactory ®...

  • Page 106: How To Learn More About Ulead Dvd Moviefactory

    All Programs DVD MovieFactory for TOSHIBA → → → Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory. 2. Insert a DVD-RW or DVD+RW disc in Burner. 3. Click Video Disc Burn Video to Disc to launch Direct Recording →...
  • Page 107 Operating Basics ■ Do not enter sleep or hibernation mode while using DVD MovieFactory. ■ Do not operate DVD MovieFactory immediately after turning on the computer. Please wait until all Disc Drive activity has stopped. ■ When recording to a DV-Camcorder, to ensure you capture all of your data, let the camcorder record for a few seconds before you begin recording your actual data.

  • Page 108: Media Care

    Operating Basics 4. About recorded DVDs ■ Some DVD-ROM drives for personal computers or other DVD PLAYERS may not be able to read DVD-R/+R/-RW/-RAM discs. ■ When playing your recorded disc on your computer, please use InterVideo WinDVD software application. ■...

  • Page 109: Using The Web Camera

    Operating Basics Using the web camera Built-in web camera is provided with some models. This section describes the bundled webcam utility, which can capture still and video images. The web camera will auto-run when Windows starts. Please unstick the protective plastic-film before using the Web Camera. EB CAMERA LENS EB CAMERA UILT...

  • Page 110: Using The Microphone

    Operating Basics Capture Still Image Click to see a preview of the captured image; you can also e-mail the image. Video Recording Click to prepare for recording. Click again to start recording. One more to stop recording and see preview of the video. Audio Recording Click to start recording, Click again to stop and listen to a preview of the audio.

  • Page 111: Modem

    To select a region, follow the steps below. 1. In Windows Vista™, click start, point to All Programs, point to TOSHIBA, point to Networking and click Modem Region Select. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.

  • Page 112: Properties Menu

    Operating Basics Properties menu Click the icon with the secondary mouse button to display the following menu. Figure 4-18 The menu list (Windows Vista™) Setting You can enable or disable the following settings: AutoRun Mode The Region Select utility starts automatically when you start up the operating system.

  • Page 113: Connecting

    Operating Basics Connecting To connect the internal modem cable, follow the steps below. 1. Plug one end of the modular cable into the modem jack. 2. Plug the other end of the modular cable into a telephone jack. ODEM JACK ELEPHONE JACK Figure 4-19 Connecting the internal modem Do not pull on the cable or move the computer while the cable is...

  • Page 114: Wireless Communications

    TOSHIBA strongly recommends the customer to enable the encryption function. ■ TOSHIBA is not liable for the eavesdropping of data due to the use of Wireless LAN and the damage thereof. User’s Manual 4-40...

  • Page 115: Wireless Communication Switch

    Operating Basics Wireless communication switch You can enable or disable RF transmission(Wireless LAN) functions on and off, with this switch (Provided with some models). No transmissions are sent or received when the switch is off. Slide the switch toward the right of the computer to turn it on and toward the left of the computer to turn it off.

  • Page 116: Connecting Lan Cable

    Operating Basics Connecting LAN cable The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer’s default settings could cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures. If you are using Fast Ethernet LAN (100 Mbit/s, 100BASE-TX), be sure to connect with a category 5 cable, CAT5, or higher.

  • Page 117: Cleaning The Computer

    Operating Basics Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and use care with liquids around the computer. ■ Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely before you turn it on again.

  • Page 118: Chapter 5 The Keyboard

    Chapter 5 The Keyboard The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with. Keyboards for numerous languages are available. There are four types of keys: typewriter keys, function keys, soft keys, and Windows special keys.

  • Page 119: Function Keys: F1

    Soft keys: FN key combinations The FN (function) is unique to Toshiba computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.
  • Page 120 The Keyboard .Sleep: Pressing FN + F3 switches the system to sleep mode. Hibernate: Pressing FN + F4 switches the system to hibernation mode. Output: Pressing FN + F5 changes the active display device. Brightness down: Pressing FN + F6 decreases the computer’s display panel brightness in individual steps.

  • Page 121: Fn Sticky Key

    FN sticky key You can use the Toshiba Accessibility Utility to make the FN key sticky, that is, you can press it once, release it, and they press an “F number” key. To start the Toshiba Accessibility Utility, click Start → All Programs →...

  • Page 122: Generating Ascii Characters

    The Keyboard Generating ASCII characters Not all ASCII characters can be generated using normal keyboard operation. But, you can generate these characters using their ASCII codes. With the overlay on: 1. Hold down ALT. 2. Using the overlay keys, type the ASCII code. 3.

  • Page 123: Chapter 6 Power And Power-Up Modes

    Chapter 6 Power and Power-up Modes The computer’s power resources include the AC adaptor and an internal battery. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power-up modes. Power conditions The computer’s operating capability and battery charge status are affected by the power conditions: whether an AC adaptor is connected, whether a...

  • Page 124: Power Indicators

    • LED: Battery trigger point blinking orange DC IN off Battery charge is Computer goes into exhausted hibernation or shuts down (depending on the Toshiba power Management Utility Setting) No battery • No operation installed •LED: Battery off DC IN off...

  • Page 125: Dc In Indicator

    Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. The battery recharges the RTC batteries. The battery maintains the state of the computer when you enable hibernation and sleep.

  • Page 126: Real Time Clock Battery

    The computer’s RTC battery is a lithium ion battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of.
  • Page 127 Power and Power-up Modes Warning: Indicates a potentially hazardous situation, Which could result in death or serious injury, if you do not follow instructions. Caution: Indicates a potentially hazardous situation, Which if not avoided, may result in moderate or minor injury or property damage. Note: Provides important information.
  • Page 128 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture. 3. Make sure the battery is securely installed in the computer before attempting to charge the battery pack.

  • Page 129: Charging The Batteries

    The Battery indicator glows orange when the battery is being charged. Use only the computer connected to an AC power source or the optional TOSHIBA Batteries charger to charge the battery pack. Never attempt to charge the battery pack with any other charger...

  • Page 130: Battery Charging Notice

    Power and Power-up Modes Time The following table shows the approximate time required to fully charge a discharged battery. Charging time (hours) Battery type Power on Power off Battery pack (6 cell) 8 hours or more 3 hours Battery pack (9 cell) 8 hours or more 4 hours RTC battery...

  • Page 131: Monitoring Battery Capacity

    Power and Power-up Modes Monitoring battery capacity Remaining battery power can be monitored in Power Options. ■ Wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time. The computer needs this time to check the battery’s remaining capacity and to calculate the remaining operating time, based on the current power consumption rate and remaining battery capacity.

  • Page 132: Extending Battery Life

    Power and Power-up Modes Retention Time Battery type State and Retention Time Battery pack (6 cell) about 1 days (sleep mode) about 14 days (shutdown mode) Battery pack (9 cell) about 2 days (sleep mode) about 21 days (shutdown mode) RTC battery about 3 months Extending battery life...

  • Page 133: Removing The Battery Pack

    Power and Power-up Modes Removing the battery pack To remove a discharged battery, follow the steps as detailed below: ■ When handling battery pack, be careful not to short circuit the terminals. Also do not drop, hit or otherwise apply impact; do not scratch or break the casing and do not twist or bend the battery pack.

  • Page 134: Installing The Battery Pack

    7. Pull the battery pack forward to remove it. For environmental reasons, do not throw away a spent battery pack. Please return spent battery pack to your TOSHIBA dealer. Installing the battery pack To install a battery pack, follow the steps below.

  • Page 135: Starting The Computer By Password

    Power and Power-up Modes Starting the computer by password If you have already registered a password, please enter the password manually to start the computer: To start up the computer with the user password, follow these steps: 1. Turn on the power as described in Chapter 3, Getting Started.

  • Page 136: Chapter 7 Hw Setup And Passwords

    TOSHIBA HW Setup allows you to configure settings for Display, CPU, Boot priority, Keyboard, USB, LAN, General and Password. If the supervisor password is set, access to the TOSHIBA HW Setup program can be prevented when the user password is used to log on to the computer.

  • Page 137: User Password

    HW Setup and Passwords General This window displays the BIOS version and contains two buttons: Default and About. Default Returns all HW Setup values to the factory settings. About Displays the HW Setup version. Setup This field displays the installed BIOS version and date. Password User Password This option allows you to set or reset the user password for power on.

  • Page 138: Power On Display

    HW Setup and Passwords To delete a user password: 1. Select Not Registered to display the following prompt: Enter Password: 2. Enter the currently registered password. The character string you enter is displayed as a string of asterisks. Enter Password: **** 3.

  • Page 139: Boot Priority

    HW Setup and Passwords Dynamic CPU Frequency Mode This option allows you to choose from the following settings: Dynamically CPU power consumption and clock speed Switchable automatic switching function is enabled. When the computer is in use, CPU operation is automatically switched when necessary.
  • Page 140 HW Setup and Passwords Keyboard Wake-up on Keyboard When this feature is enabled and the computer is in sleep mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in sleep mode. Enabled Enables the Wake-up on Keyboard.

  • Page 141: Chapter 8 Optional Devices

    Chapter 8 Optional Devices Optional devices can expand the computer’s capabilities and its versatility. The following optional devices are available from your TOSHIBA dealer: Cards/Memory ■ ExpressCard ■ SD, SDHC, MS, MS Pro, MMC memory card ■ Memory expansion Power devices ■...

  • Page 142: Expresscard

    Optional Devices ExpressCard Installing an ExpressCard The ExpressCard slot is located on the left side of the computer. You can install one ExpressCard in the slot. Windows’ hot-install feature allows you to install ExpressCard while the computer’s power is on. Do not install an ExpressCard while the computer is in sleep or hibernation mode.

  • Page 143: Removing An Expresscard

    Optional Devices Removing an ExpressCard To remove the ExpressCard, follow the steps below. 1. In Windows Vista™, open the Safely Remove Hardware icon on the system tray and disable the ExpressCard. 2. Press Eject button slightly to make the ExpressCard stretch out. 3.

  • Page 144: Multiple Digital Media Card Slot

    Optional Devices Multiple digital media card slot The computer is equipped with a multiple digital media card slot that can accommodate Secure Digital (SD)/ Secure Digital High Capacity (SDHC)/ Memory Stick (MS)/Memory Stick Pro (MS Pro)/Multi Media Card (MMC) memory cards. These memory cards allow you to easily transfer data from devices, such as digital cameras and Personal Digital Assistants, that use SD/SDHC/MS/MS Pro/MMC memory cards.

  • Page 145: Removing A Sd/Sdhc/Ms/Ms Pro/Mmc Card

    Optional Devices ■ Keep foreign objects out of the multiple digital media card slot. A pin or similar object can damage the computer's circuitry. ■ Make sure the SD/SDHC/MS/MS Pro/MMC card is oriented properly before you insert it. ■ Memory Stick Duo/PRO Duo and the Memory Stick adaptor are not compatible with the multiple digital media card slot.

  • Page 146: Memory Expansion

    Optional Devices ■ Make sure the multiple digital media card slot indicator is out before you remove the card or turn off the computer’s power. If you remove the card or turn off the power while the computer is accessing the card you may lose data or damage the card.
  • Page 147 Optional Devices Figure 8-5 Removing the cover 6. Insert the memory module into the connector on the computer. Press the module carefully and firmly to ensure a solid connection. 7. Push the module down so that it lies flat and is secured by two latches.

  • Page 148: Removing Memory Module

    Optional Devices Figure 8-7 Pushing the memory module down 8. Seat the cover and secure it with one screw. 9. When you turn the computer on, it should automatically recognize the total memory capacity. Use the HW Setup program to verify that the added memory is recognized.

  • Page 149: Additional Battery Pack (6 Cell And 9 Cell)

    Optional Devices Figure 8-8 Removing the memory module 7. Seat the cover and secure it with one screw. Additional battery pack (6 Cell and 9 Cell) You can increase the portability of the computer with additional battery packs (6 Cell: PA3536U-1BRS/PA3536U-1BAS, 9 Cell: PA3537U- 1BRS/PA3537U-1BAS).

  • Page 150: External Monitor

    Optional Devices External monitor An external analog monitor can be connected to the external monitor port on the computer, Port Replicator. The computer supports VGA and Super VGA video modes. To connect a monitor, follow the steps below. If an external monitor is connected to the computer, do not connect the Port Replicator.

  • Page 151: Setting For Display Video On Hdmi

    Optional Devices Figure 8-9 Connecting a HDMI cable 2. Plug the other end of the HDMI cable into the HDMI out port on your computer. Setting for display video on HDMI To view video on the HDMI device, be sure to configure the following settings otherwise you may find that nothing is displayed.

  • Page 152: Security Lock

    Optional Devices Security lock A security lock enables you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer. Attach one end of a cable to the desk and the other end to the security lock slot on the right side of the computer Figure 8-10 Security lock User’s Manual...

  • Page 153: Troubleshooting

    Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.

  • Page 154: Preliminary Checklist

    Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer.

  • Page 155: Hardware And System Checklist

    When the computer does not start properly, check the following items: ■ Self Test ■ Power Sources ■ Power-on Password Self test When the computer starts up, the self-test will be run automatically, and the following will be displayed: TOSHIBA Leading Innovation>>> User’s Manual...

  • Page 156: Power

    Troubleshooting This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system. Depending on how the Boot Priority is set in the Hardware Setup, the computer tries to load first from drive A then from drive C, or first from drive C then from drive A.

  • Page 157: Ac Power

    Troubleshooting AC power If you have trouble turning on the computer with the AC adaptor connected, check the DC IN indicator. Refer to Chapter 6, Power and Power-up Modes for more information. Problem Procedure AC adaptor doesn’t Check the connections. Make sure the cord is power the computer firmly connected to the computer and a power (DC IN indicator does...
  • Page 158 Troubleshooting Battery If you suspect a problem with the battery, check the DC IN indicator as well as the battery indicator. For information on indicators and battery operation see Chapter 6, Power and Power-up Modes Problem Procedure Battery doesn’t power The battery may be discharged - connect the AC the computer adaptor to recharge the battery.

  • Page 159: Password

    Troubleshooting Password Problem Procedure Cannot enter password Refer to the Password section in Chapter 7, Setup and Passwords Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard and Chapter 7, HW Setup Passwords.

  • Page 160: Hard Disk Drive

    Troubleshooting Hard disk drive Problem Procedure Computer does not Check if a diskette is in the diskette drive or a boot from hard disk CD/DVD/HD DVD is in the optical disc drive. drive Remove any diskette and/or CD/DVD/HD DVD and check Boot priority. Refer to Chapter 7, Boot Priority section.

  • Page 161: Dvd Super Multi(+-R Dl) Drive

    The Grand Tour If you have trouble writing, make sure you are Cannot write correctly observing the following precautions: ■ Use only media recommended by TOSHIBA ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.

  • Page 162: Hd Dvd-Rom Drive

    Tour. If you have trouble writing, make sure you are Cannot write correctly observing the following precautions: ■ Use only media recommended by TOSHIBA ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.

  • Page 163: Hd Dvd-Rw Drive

    Tour. If you have trouble writing, make sure you are Cannot write correctly observing the following precautions: ■ Use only media recommended by TOSHIBA ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.
  • Page 164 Grand Tour If you have trouble writing, make sure you are Cannot write correctly observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.

  • Page 165: Diskette Drive

    Troubleshooting Diskette drive Problem Procedure Drive does not operate There may be a faulty cable connection. Check the connection to the computer and to the drive. Some programs run The software or hardware configuration may be causing a problem. Make sure the hardware correctly but others do configuration matches your software needs.
  • Page 166 Troubleshooting Problem Procedure The mouse pointer Try changing the speed setting in the mouse moves too fast or too control utility. slow 1. Open the Control Panel, select the Mouse icon and press ENTER. 2. Click the Pointer Option tab. 3.

  • Page 167: Expresscard

    Troubleshooting USB mouse This section applies only with Windows Vista™ operating systems. Problem Procedure On-screen pointer does The system might be busy. If the pointer is not respond to mouse shaped as an hourglass, wait for it to resume its operation normal shape and try again to move it.

  • Page 168: Sd/Sdhc/Ms/Ms Pro/Mmc Card

    Troubleshooting SD/SDHC/MS/MS Pro/MMC card Refer also to Chapter 8, Optional Devices Problem Procedure Memory card error Reseat the memory card to make sure it is firmly occurs connected. Check the card’s documentation. You cannot write to the Make sure the card is not write protected. memory card You cannot read a file Make sure the target file is on the memory card...

  • Page 169: Sound System

    Troubleshooting Sound system Problem Procedure No sound is heard Adjust the volume control dial. Check the software volume settings. Make sure the headphone connection is secure. Check Windows Device Manager. Make sure the sound function is enabled and that settings for I/O address, Interrupt level and DMA are correct for your software and do not conflict with other hardware devices that you may have connected...

  • Page 170: Modem

    Troubleshooting Modem Problem Procedure Communication Make sure the computer’s internal modem software can’t initialize settings are correct. Refer to Phone and Modem modem Options in the Control Panel. You can hear a dial tone If the call is going through a PBX machine, make but can’t make a call sure the communication application’s tone dial detection feature is disabled.

  • Page 171: Sleep/Hibernation

    Troubleshooting Sleep/Hibernation Problem Procedure The system will not Is Windows Media Player open? The system enter sleep/hibernation might not enter sleep/hibernation, if Windows Media Player is either playing a selection or finished playing a selection. Close Windows Media Player before you select sleep/hibernation. If problems persist, contact your dealer.

  • Page 172: Recovery Discs

    Recovery Media” section in this manual. You will be directed to select Restore Original Factory Image from the drop-down menu. If you have not created Recovery Media, please contact TOSHIBA support for assistance. User’s Manual 9-20...

  • Page 173: Toshiba Support

    Troubleshooting TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system so it is important that you investigate other sources of assistance first.

  • Page 174: Where To Write

    Troubleshooting Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed on the below. Outside of Europe Europe Australia Germany & Austria TOSHIBA Australia Pty. Ltd.

  • Page 175: Disclaimers

    5°C to 30°C (41°F to 86°F) or > 25°C (77°F) at high altitude (all temperature references are approximate and may vary depending on the specific computer model-please refer to your PC documentation or visit the Toshiba website at www.pcsupport.toshiba.com for details).

  • Page 176: Memory (Main System)

    For optimum performance, use your computer product only under recommended conditions. Read additional restrictions in your product documentation. Contact Toshiba technical service and support, refer to TOSHIBA support section in chapter 9, Troubleshooting for more information.

  • Page 177: Battery Life

    This is a normal phenomenon for all batteries. To purchase a new battery pack, see the accessories information that is shipped with your computer, or visit the Toshiba web site at www.pcsupport.toshiba.com. HDD drive capacity 1 Gigabyte (GB) means 10 = 1,000,000,000 bytes using powers of 10.

  • Page 178: Wireless Lan

    Disclaimers Wireless LAN The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations. The actual transmission speed will be lower than the theoretical maximum speed.
  • Page 179 Appendixes Table of Contents Specifications................A-1 Appendix A Display Controller and Modes............ B-1 Appendix B V.90/V.92..................C-1 Appendix C Wireless LAN................. D-1 Appendix D AC Power Cord and Connectors..........E-1 Appendix E User’s Manual Appendixes-1...

  • Page 180: Specifications

    Appendix A Specifications This appendix summarizes the computer’s technical specifications. Environmental requirements Operating Non-operating Ambient temperature 5°C to 35°C -20°C to 60°C Relative humidity 20% to 80% 10% to 90% Altitude (from sea level) 0 to 3,000 meters 0 to 10,000 meters Power requirements AC adaptor 100-240 volts AC...
  • Page 181 Specifications Built-in modem The ability of this feature is depending on the model you purchased. Network control unit (NCU) Type of NCU Type of line Telephone line (analog only) Type of dialing Pulse Tone Control command AT commands EIA-578 commands Monitor function Computer’s speaker Communication specifications...

  • Page 182: Display Controller And Modes

    Appendix B Display Controller and Modes Display controller The display controller interprets software commands into hardware com- mands that turn particular pixels on or off. The controller is an advanced Video Graphics Array (VGA) that provides Super VGA (SVGA) and Extended Graphics Array (XGA) support for the internal LCD and external monitors.

  • Page 183: Video Modes

    Display Controller and Modes Video modes The computer supports video modes defined in the table below. If your application offers a selection of mode numbers that do not match the num- bers on the table, select a mode based on, resolution, number of colors and refresh rates.
  • Page 184 Appendix C V.90/V.92 The TOSHIBA internal modem uses V.90 technology. The modem is capable of downstream speeds of 56Kbps (kilobits per second) when connected to an Internet service provider that supports V.90/V.92. As with any modem, the actual throughput (speed of data transfer) depends on analog telephone line conditions, which can vary considerably.
  • Page 185 V.90/V.92 Table Result codes for a V.90 connection Result code Description CONNECT 32000 EC* Connection at 32000 bits/s CONNECT 36000 EC* Connection at 36000 bits/s CONNECT 40000 EC* Connection at 40000 bits/s CONNECT 44000 EC* Connection at 44000 bits/s CONNECT 48000 EC* Connection at 48000 bits/s CONNECT 52000 EC* Connection at 52000 bits/s...
  • Page 186 V.90/V.92 V42bis V.42 error control and V.42bis data compression V.42 error control only NoEC No error control protocol AT Command -V90=* V.90 Dial Line Rate -V90 sets the maximum V.90 downstream that the modem attempts to connect -V90=0 V.90 disabled -V90=1 V.90 enabled: automatic speed selection - maximum modem speed(default)

  • Page 187: Card Specifications

    Appendix D Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card specifications ■ Mini Card Form Factor ■ IEEE 802.11 Standard for Wireless LANs Compatibility ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance.
  • Page 188 Subject to the radio regulations that apply in your country/region, your Wireless LAN card may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for infor- mation about the radio regulations that apply in your country/region.
  • Page 189 Wireless LAN When installing Wireless LAN cards, the channel configuration is managed as follows: ■ For wireless clients that operate in a Wireless LAN infrastructure, the Wireless LAN card will automatically start operation at the channel identified by the Wireless LAN Access Point. When roaming between different access points the station can dynamically switch to another channel if required.
  • Page 190 Wireless LAN countries/regions that in which these channels can be used. These channels are available to A/B/G combo type only. Available Area: US (USA, CANADA) only. User’s Manual...

  • Page 191: Ac Power Cord And Connectors

    Appendix E AC Power Cord and Connectors The AC input plug of power cord must be compatible with various interna- tional AC power outlets. Power cords need to meet the local standards and the specifications listed as below: Length: Minimum 1.7 meters Wire size: Minimum 0.75 mm Current rating:...
  • Page 192 AC Power Cord and Connectors In Europe, two conductors power cords must be VDE type, H05VVH2-F or H03VVH2-F; while three conductors be VDE type, H05VV-F. For the United States and Canada, two pin plug configuration must be 2-15P (250V) or 1-15P (125V); while three pin be 6-15P (250V) or 5-15P (125V) as designated in the U.S.
  • Page 193 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port ANSI: American National Standards Institute APM: advanced power manager ASCII: American Standard Code for Information Interchange BIOS: basic input output system CD-ROM: Compact Disc Read Only Memory CD-RW: Compact Disc ReWritable...
  • Page 194 Glossary I/O: input/output IrDA: Infrared Data Association IRQ: interrupt request KB: kilobyte LCD: liquid crystal display LED: light emitting diode LSI: large scale integration MB: megabyte OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect RAM: random access memory RGB: red, green, and blue ROM: read only memory RTC: real time clock...
  • Page 195 Glossary ANSI: American National Standards Institute. An organization established to adopt and define standards for a variety of technical disciplines. For example, ANSI defined the ASCII standard and other information processing requirements. antistatic: A material used to prevent the buildup of static electricity. application: A group of programs that together are used for a specific task such as accounting, financial planning, spreadsheets, word processing and games.
  • Page 196 Glossary cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time.
  • Page 197 Glossary Composite Video (YUV): A standard video signal used to transmit images, e.g. from a VCR to a TV. computer program: A set of instructions written for a computer that enable it to achieve a desired result. computer system: A combination of hardware, software, firmware, and peripheral components assembled to process data into useful information.
  • Page 198 Glossary Digital Audio: An audio compression standard that enables high-quality transmission and real-time playback of sound files. disk drive: The device that randomly accesses information on a disk and copies it to the computer’s memory. It also writes data from memory to the disk.
  • Page 199 (FDD): An electromechanical device that reads and writes to floppy diskettes. Fn-esse: A TOSHIBA utility that allows you to assign functions to hot keys. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk.
  • Page 200 FN, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that allows you to set the parameters for various hardware components. icon: A small graphic image displayed on the screen or in the indicator panel.
  • Page 201 Glossary K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. See also byte and kilobyte. KB: See kilobyte. keyboard: An input device containing switches that are activated by manually pressing marked keys.
  • Page 202 Glossary monitor: A device that uses rows and columns of pixels to display alphanumeric characters or graphic images. See also CRT. motherboard: A name sometimes used to refer to the main printed circuit board in processing equipment. It usually contains integrated circuits that perform the processor’s basic functions and provides connectors for adding other boards that perform special functions.
  • Page 203 The electrical connection through which the computer sends and receives data to and from devices or other computers. Power Option Utility: A TOSHIBA utility that allows you to set the parameters for various power-saving functions. printed circuit board (PCB): A hardware component of a processor to which integrated circuits and other components are attached.
  • Page 204 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. touchpad: A pointing device integrated into the TOSHIBA computer palm rest. User’s Manual...
  • Page 205 Glossary TTL: Transistor-transistor logic. A logic circuit design that uses switching transistors for gates and storage. Universal Serial Bus: This serial interface allows you to communicate with several devices connected in a chain to a single port on the computer. VGA: Video Graphics Array is an industry standard video adaptor that allows you to run any popular software.
  • Page 206 Index Checklist equipment, 1-1 AC adaptor, 1-8, 2-5, A-1 problems, 9-2, 9-3 DC IN 19V port, 2-4 Cleaning the computer, 4-43 additional, 1-16, 8-9 COM port, 4-38 connecting, 3-2 problems, 9-5 safety instructions, -ii, -xxx DC IN ASCII characters, 5-5 connecting, 3-2 Auto power on, See Power indicator, 6-3...
  • Page 207 5-3 port, 1-8 hibernate, 5-3 problems, 9-16 lock, 5-2 output/display, 5-3 power plan, 5-2 FN + 1 (TOSHIBA zooming utility sleep, 5-3 reduce), 5-4 sound mute, 5-2 FN + 2 (TOSHIBA zooming utility TOSHIBA zooming utility enlarge), 5-4...
  • Page 208 Index Ports DC IN 19V, 2-4 LAN, 1-9, 4-41 external monitor, 1-8, 2-3 cable types, 4-42 headphone, See Sound system connecting, 4-42 LAN, 2-3 disconnecting, 4-42 USB, 1-8, 2-3, 2-4 indicator, 4-42 Power, 1-8 Lock, security, See Security lock button location, 2-7 conditions, 6-1 hibernation mode, 3-4 Main battery, See Battery pack...
  • Page 209 Sound system, 1-9 headphone, 1-8, 2-2 microphone, 2-2 speaker, 2-7 volume control, 2-2 TOSHIBA Assist, 1-14 TOSHIBA Disc Creator, 4-30 TOSHIBA PC Diagnostic Tool, 1-13 TOSHIBA support, 9-21 TOSHIBA zooming utility, 1-13 Touchpad using, 4-1 location, 2-3, 2-4 USB device, 1-8 User’s Manual...

This manual is also suitable for:

Satellite l350d seriesSatellite pro l350d seriesSatellite pro l350 series

Table of Contents