System Information - Toshiba Satellite L350 Maintenance Manual

3.2 Quick Start
NOTE: Setup All of DMI Information in Type is Max 32 Digital
The attributes that have been modified would be marked in red; otherwise in yellow.
User could press F2 to save the changes, or press F4 to ignore and exit the current
program.

3.2.9 System Information

This function is used to read the system information. When the test is completed, a file
named System.log will be saved in the defined location. During the reading process, the
following screen will be displayed to indicate that the progress is in detection:
On the left column of the above screen, the detected hardware components are listed. The
corresponding information of the detected hardware components is displayed on the right
of the screen. It displays the current running status information of the check program.
The name of the program is marked on the top of the screen. At the bottom, the function
keys are listed for user operation. During the detection, keyboard operation is invalid.
When the detection is finished, the hardware components information will be displayed
as follows:
Satellite L350,Satellite Pro L350, EQUIUM L350,SATEGO L350 Maintenance Manual
3 Diagnostic Programs
11