Procedure 5 Connector Check And Replacement Check - Toshiba Satellite L350 Maintenance Manual

2 Troubleshooting

Procedure 5 Connector Check and Replacement Check

The HDD or system board may be faulty. Disassemble the computer following the steps
described in Chapter 4 and perform the following checks:
Check 1 Make sure the following connectors have been firmly connected to the
HDD, system board and CPU.
HDD
If any connector is loose or off, reconnect it firmly and return to Procedure 1.
If there is still an error, perform Check 2.
Check 2 The HDD may be damaged. Replace it with a new one following the
disassembling instructions in Chapter 4. If the problem persists, perform
Check 3.
Check 3 The System board may be damaged. Replace it with a new one following
the disassembling instructions in Chapter 4. If the problem persists,
perform Check 4.
Check 4 The CPU may be damaged. Replace it with a new one following the
disassembling instructions in Chapter 4.
2-14 Satellite L350/Satellite Pro L350/EQUIUM L350/SATEGO L350
System board
2.5 2.5-inch HDD
CPU
Maintenance Manual