4 Replacement Procedures
4.26 Wireless LAN antenna/Bluetooth antenna
Removing the Wireless LAN antenna/Bluetooth antenna
To remove the wireless LAN antenna/Bluetooth antenna, follow the steps below and refer to
Figure 4-49 and 4-50.
1. Peel off one acetate tape and four insulators from the back of the middle assembly.
2. Tale out the wireless LAN antenna cables from the hole of the middle frame.
Insulator
Figure 4-49 Removing the wireless LAN antenna cable
4-66
Insulator
[CONFIDENTIAL]
4.26 Wireless LAN antenna/Bluetooth antenna
Acetate tape
TECRA S3 Maintenance Manual (960-532)
Wireless LAN
antenna cable