Toshiba TECRA S4 Maintenance Manual page 73

2.4 System Board Troubleshooting
Table 2-5 Printer port LED suspend mode error status (2/3)
LED Status
39h Resume error check in suspend mode.
Execution of driver for suspend
Clearing of data for Remote Lockout
Storing of FDD register
Storing of USB register
Halt of HC
Storing CPU register
Permission of system area and memory cache
Suspending of HDD
Storing KBC,SCC and MOUSE
Storing of PCI device
Storing of PIT
Starts sequence for storing display system.
Storing of PIC
Storing of DMAC
Storing of system status command port
Storing of SIO
Storing of PCMCIA card
Storing of RTC
Processing of system peculiar HW preservation
Calculation of check sum (conventional memory)
3Ah Suspending for boot mood
3Dh Processing of VGA –off (boot)
Suspending of HDD (boot)
Transition to S5 of Bluetooth (boot)
3Eh Suspending of boot/ resume for PnP
Suspending of boot /resume for password
3Fh Waiting for completion of suspending for HDD password
TECRA S3 Maintenance Manual (960-532)
Test item
2 Troubleshooting Procedures
Contents
Check if IRT process is being executed
Check if external option ROM exists
Check if FDD motor is rotating
(For models supporting built-in FDD)
(For models supporting built-in FDD)
(to work at high-speed)
(For models supporting SIO)
(For models supporting Bluetooth)
(Stores PnP resource information into
Flash ROM.)
(Stores password information into Flash
ROM.)
[CONFIDENTIAL] 2-31