1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Tecra S4
  6. User manual

Toshiba TECRA S4 User Manual

Hide thumbs Also See for TECRA S4:
Table of Contents

Advertisement

Quick Links

See also: Maintenance Manual
User's Manual
TECRA S4

Advertisement

Table of Contents
loading

Related Manuals for Toshiba TECRA S4

Summary of Contents for Toshiba TECRA S4

  • Page 1 User’s Manual TECRA S4...
  • Page 2 User’s Manual...

  • Page 3: Table Of Contents

    Table of Contents Preface General Precautions Introduction Chapter 1 Equipment checklist........1-1 Features.
  • Page 4 Replacing the battery pack ....... . .6-11 TOSHIBA Password Utility ....... . .6-13 Power-up modes .
  • Page 5 TOSHIBA Support........
  • Page 6 Regulatory statements........E-3 Using Bluetooth™ Card from TOSHIBA equipment in Japan ..E-6 Approved Countries/Regions for use (Bluetooth™...
  • Page 7 This manual has been validated and reviewed for accuracy. The instructions and descriptions it contains are accurate for the TOSHIBA Tecra S4 Portable Personal Computer at the time of this manual’s production. However, succeeding computers and manuals are subject to change without notice.
  • Page 8 EU Declaration of Conformity This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany. The complete and official EU Declaration of Conformity can be found on TOSHIBA’s web site http://epps.toshiba-teg.com on the Internet.
  • Page 9 Following information is only for EU-member states: The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
  • Page 10 User’s Manual...

  • Page 11: Preface

    This manual tells how to set up and begin using your Tecra S4 computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
  • Page 12 Preface Keys The keyboard keys are used in the text to describe many computer operations. A distinctive typeface identifies the key top symbols as they appear on the keyboard. For example, Enter identifies the Enter key. Key operation Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus sign (+).

  • Page 13: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.

  • Page 14: Instruction Manual For Safety And Comfort

    General Precautions Heat injury ■ Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time (if you rest the computer on your lap, or if you keep your hands on the palm rest, for example) your skin might suffer low-heat injury.

  • Page 15: Chapter 1 Introduction

    Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer, taking care to save the box and packing materials for future use.

  • Page 16: Documentation And Backup Media

    ■ Infineon Trusted Platform Module Utility (preinstalled in some models) ■ Online Manual Documentation and Backup Media ■ Tecra S4 Portable Personal Computer User’s Manual ■ Tecra S4 Quickstart ■ Instruction Manual for Safety and Comfort ■ Warranty information ■...

  • Page 17: Features

    Introduction Features The computer extensively uses TOSHIBA’s advanced Large Scale Integration (LSI), Complementary Metal-Oxide Semiconductor (CMOS) technology to provide compact size, minimum weight, low power usage, and high reliability, and incorporates the following features and benefits: Processor Built-in The computer is equipped with one of the ®...
  • Page 18 Introduction Memory Slots 256, 512, 1,024 or 2,048MB memory modules can be installed in the computer’s two memory slots for a maximum of 4,096MB system memory. Video RAM The graphics controller is equipped with 128MB external video RAM, and may use up to 128MB of main system memory as additional video memory for a combined total of up to 256MB video memory.
  • Page 19 Introduction Disks Hard disk drive Available in the following sizes: ■ 40.0 billion bytes (37.26 GB) ■ 60.0 billion bytes (55.89 GB) ■ 80.0 billion bytes (74.53 GB) ■ 100.0 billion bytes (93.16 GB) ■ 120.0 billion bytes (111.79 GB) Please note that part of the hard disk drive’s overall capacity is reserved as administration space.
  • Page 20 Introduction DVD Super Multi Some models are equipped with a full-size DVD drive Super Multi drive module that lets you record data to rewritable CD/DVDs as well as run 12cm (4.72") or 8cm (3.15") CD/DVDs. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed.

  • Page 21: Toshiba Dual Pointing Device

    The keyboard is compatible with the IBM ® enhanced keyboard. Refer to Chapter 5, Keyboard, for details. TOSHIBA Dual Pointing Device Built-in Touch Pad The integrated Touch Pad and control buttons in the palm rest allow control of the on-screen pointer and support functions such as the scrolling of windows.
  • Page 22 Introduction Slots PC Card The internal PC Card slot accommodates a single Type II (5mm) card. ExpressCard The internal ExpressCard slot accommodates a single ExpressCard. SD Card This slot allows you to easily transfer data from devices such as digital cameras and Personal Digital Assistants (PDAs) that use SD card flash memory.
  • Page 23 Introduction Bluetooth Some computers in this series offer Bluetooth wireless communication functionality which eliminates the need for cables between electronic devices such as computers and printers. When implemented, Bluetooth provides a fast, reliable and secure means to achieve wireless communication in a small space. Wireless LAN Some computers in this series are equipped with a Wireless LAN card that is compatible with other...

  • Page 24: Special Features

    “unlock” position at the time of purchase. Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. TOSHIBA Assist...
  • Page 25 Power is restored when the hard disk is accessed. You can specify the time in the HDD power off item of the Basic Setup tab in TOSHIBA Power Saver. System automatic...
  • Page 26 Hibernation and shuts down. You can specify the setting in the Setup Actions tab in TOSHIBA Power Saver. Heat dispersal To protect from overheating, the CPU has an internal temperature sensor. If the computer’s...

  • Page 27: Utilities

    TOSHIBA Presentation button (default setting is the simultaneous display on LCD and CRT with resolution of 1024 × 768) and to the TOSHIBA Assist button (default setting is the TOSHIBA Assist). Fingerprint utility This product has a fingerprint utility installed for...
  • Page 28 Bluetooth cannot be used in models that do not have a Bluetooth module installed. TOSHIBA SD The TOSHIBA SD memory boot utility allows you Memory Boot Utility to create a bootable SD memory card that can be used to start the system. To access this utility,...
  • Page 29 Replicator III Plus. To access this utility, launch the TOSHIBA Assist application and then select TOSHIBA Mobile Extension. TOSHIBA ConfigFree TOSHIBA ConfigFree is a suite of utilities that improve the ease and control of communication devices and network connections, help in the...
  • Page 30 Introduction TOSHIBA Password The TOSHIBA Password utility allows you to set Utility a password in order to restrict access to the computer. TOSHIBA The TOSHIBA Accessibility utility provides Accessibility support to movement impaired users when they need to use the TOSHIBA Hote-key functions. In use, the utility allows you to make the Fn key “sticky”, that is you can press it once, release it,...

  • Page 31: Options

    A 256MB, 512MB, 1,024MB, or 2048MB memory module (DDR2-667/533) can easily be installed in the computer. Battery pack An additional battery pack can be purchased from your TOSHIBA dealer as either a spare or replacement. Extended capacity An additional battery pack can be purchased battery pack from your TOSHIBA dealer as either a spare or replacement.
  • Page 32 The Bluetooth Wireless Mouse is a wireless Mouse optical mouse compatible with Bluetooth. You can buy the Bluetooth Wireless Mouse from a TOSHIBA dealer. Bluetooth Wireless The Bluetooth Wireless Stereo is a wireless Stereo stereo headphone set compatible with Bluetooth.

  • Page 33: Chapter 2 The Grand Tour

    Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Legal Footnote (Non-applicable Icons) For more information on the Legal Footnote regarding Non-applicable Icons, please refer to Chapter 10, Legal Footnotes.
  • Page 34 The Grand Tour Wireless Slide this switch to the left to turn off Wireless communication LAN and Bluetooth functions. Slide it to the right switch to turn on the functions. All models are provided with a Wireless Communication switch although only some models are equipped with both Wireless LAN and Bluetooth functions.

  • Page 35: Left Side

    The Grand Tour Display latch This latch secures the LCD panel in its closed position. Slide the latch to open the display. Infrared port This infrared port is compatible with Infrared Data Association (IrDA 1.1) standards. It enables cableless 4 Mbps, 1.15 Mbps, 115.2 kbps, 57.6 kbps, 38.4 kbps, 19.2 kbps or 9.6 kbps data transfer with IrDA 1.1 compatible external devices.
  • Page 36 The Grand Tour Link indicator This indicator glows green when the computer is (green) connected to a LAN and the LAN is functioning properly. LAN active indicator This indicator glows orange when data is being (orange) exchanged between the computer and the LAN. Cooling vents Cooling vents help CPU keep from overheating.

  • Page 37: Right Side

    The Grand Tour Right side The following figure shows the computer’s right side. Ultra Slim Bay Modem jack USB ports Serial port The right side of the computer Universal Serial Bus Two Universal Serial Bus ports are on the right (USB 2.0) ports side.

  • Page 38: Back Side

    The Grand Tour Ultra Slim Bay A DVD-ROM and CD-R/RW drive, DVD Super Multi drive and Ultra Slim Bay HDD adaptor can be installed in the Ultra Slim Bay. Serial port Use this 9-pin port to connect serial devices such as an external modem, serial mouse or serial printer.

  • Page 39: Underside

    The Grand Tour Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. Notches Battery lock Battery pack Battery release latch Ultra Slim Bay Docking port Memory module cover Ultra Slim Bay latch Hard disk drive...
  • Page 40 The Grand Tour Ultra Slim Bay See the Right side section in this chapter for details. Ultra Slim Bay latch Slide the latch to release or secure the Ultra Slim Bay ejector. Be sure to lock the Ultra Slim Bay latch before you transport or carry the computer.

  • Page 41: Front With The Display Open

    Touch Pad LCD Sensor switch control buttons (Not shown) Touch Pad TOSHIBA Presentation button The front of the computer with the LCD panel open Display hinge The display hinge holds the LCD display panel at easy-to-view angles. Fingerprint Sensor This sensor enables you to enroll and recognize a fingerprint.
  • Page 42 The Grand Tour Display screen The LCD screen displays high-contrast text and graphics. The available resolution depends on the model. With XGA, you can change the resolution between 800 × 600 and 1024 × 768 pixels. With SXGA+, between 800 × 600 and 1400 ×...
  • Page 43 Hibernation Mode. Use the TOSHIBA Power Saver Utility to enable or disable this feature. The default is “enabled”. Refer to the TOSHIBA Power Saver Utility and Panel Power Off/On items in Chapter 1, Special features, for details on settings.

  • Page 44: System Indicators

    The Grand Tour System indicators LEDs beside icons, light when various computer operations are in progress. System indicators SD card The SD card indicator glows green when the computer is accessing the SD card slot. DC IN The DC IN indicator glows green when DC power is supplied from the AC power adaptor.

  • Page 45: Keyboard Indicators

    The Grand Tour Keyboard indicators The figures below show the positions of the keypad overlay indicators and the Caps Lock indicator. When the Arrow mode indicator glows the keypad overlay lets you control the cursor. When the Numeric mode indicator glows the keypad overlay lets you enter numbers.

  • Page 46: Usb Floppy Disk Drive (Optional)

    The Grand Tour USB floppy disk drive (optional) The optional USB floppy disk drive accommodates 1.44-megabyte or 720-kilobyte floppy disks and connects to the USB port. USB connector Disk-In-Use Indicator Floppy disk slot Eject button USB floppy disk drive USB connector Insert this connector into one of the USB ports of your computer.

  • Page 47: Optical Disc Drives

    The Grand Tour Optical disc drives One of the following optical disc drives is installed in the computer: DVD-ROM and CD-R/RW and DVD Super Multi drives. An ATAPI interface controller is used for CD/DVD-ROM operation. When the computer is accessing a CD/DVD, an indicator on the drive glows. For information on loading and unloading discs, refer to the Using optical disc drives...

  • Page 48: Dvd Super Multi Drive

    The Grand Tour Formats The drives support the following formats: ■ ■ CD-ROM DVD -Video ■ ■ DVD-ROM CD-Text ■ ■ CD-DA CD-ROM Mode 1, Mode 2 ■ ■ Photo CD™ Enhanced CD (CD-EXTRA) (single/multi-session) ■ Addressing Method 2 ■ CD-ROM XA Mode 2 (Form1, Form2) DVD-ROM and CD-R/RW drive...

  • Page 49: Ac Adaptor

    The Grand Tour AC adaptor The AC adaptor can automatically adjust to any voltage ranging from 100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to use this computer in almost any country/region. The adaptor converts AC power to DC power and reduces the voltage supplied to this computer.
  • Page 50 The Grand Tour Always use the TOSHIBA AC adaptor that was provided with your PC and the TOSHIBA Battery Charger (that may have been provided with your PC), or use AC adaptors and battery chargers specified by TOSHIBA to avoid any risk of fire or damage to the PC possibly resulting in serious injury.

  • Page 51: Chapter 3 Getting Started

    Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: ■ Connecting the AC adaptor ■ Opening the display ■ Turning on the power ■ Starting up for the first time ■...

  • Page 52: Other Things To Note

    TOSHIBA Battery Charger (that may have been provided with your computer), or use AC adaptors and battery chargers specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor or Battery Charger could cause fire or damage to the computer possibly resulting in serious injury.
  • Page 53 Getting Started ■ When you connect the AC adaptor to the computer, always follow the steps in the exact order as described in the User’s Manual. Connecting the power cable to a live electrical outlet should be the last step otherwise the adaptor DC output plug could hold an electrical change and cause an electrical shock or minor bodily injury when touched.

  • Page 54: Opening The Display

    Getting Started 2. Connect the AC adaptor’s DC output plug to the DC IN 15V jack on the back of the computer. DC IN 15V jack Connecting the adaptor to the computer 3. Plug the power cord into a live wall outlet. The Battery and DC IN indicators on the front of the computer should glow.

  • Page 55: Turning On The Power

    Getting Started Turning on the power This section describes how to turn on the power. The Power button LED indicates the status. Refer to the Power indicators section in Chapter 6, Power and Power-Up Modes. ■ After you turn on the power for the first time, do not turn it off until you have set up the operating system.

  • Page 56: Turning Off The Power

    ■ When the AC adaptor is connected, the computer will go into Standby Mode according to the settings in the TOSHIBA Power Saver utility. ■ To restore operation from Standby Mode, press the power button or press any key. The latter action only works on the internal keyboard if the Wake-up on Keyboard option is enabled in HW Setup.
  • Page 57 1. Click start, click Turn Off Computer and click Stand By. 2. Close the computer’s LCD display panel. This feature must be enabled. Refer to the Setup Actions tab in TOSHIBA Power Saver Utility described in the Control Panel. Open Performance and Maintenance and open TOSHIBA Power Saver.

  • Page 58: Hibernation Mode

    For the computer to shut down in Hibernation Mode, this feature must be enabled in two places: (a) the Hibernate tab in Power Options, (b) and the Setup Actions tab in TOSHIBA Power Saver. If you do not configure this feature, the computer will shut down in Standby Mode - if battery power becomes depleted, data saved in Standby Mode will be lost.

  • Page 59: Restarting The Computer

    3. Select the Hibernate window in the Power Options Properties, select the Enable hibernation check box and click the Apply button. 4. Open TOSHIBA Power Saver. 5. Select the Setup Action window. 6. Enable the desired Hibernation settings for When I press the power button and When I close the lid.

  • Page 60: Restoring The Preinstalled Software

    Restoring TOSHIBA utilities and drivers If Windows is working properly, individual drivers or applications can be separately restored. The TOSHIBA Tools & Utilities folder (C:\TOOLSCD) contains drivers and applications, which are included with your computer system. If your system drivers or applications have become damaged in some way, you can reinstall most of the components from this folder.

  • Page 61: Chapter 4 Operating Basics

    This chapter describes the basic operations of your computer and precautions when using it, as well as the handling of CDs/DVDs. TOSHIBA Dual Pointing Device The computer is equipped with a dual point system: a Touch Pad and an AccuPoint pointing stick.

  • Page 62: Using The Accupoint

    Operating Basics Two buttons below the Touch Pad are used like the buttons on a mouse pointer. Press the left button to select a menu item or to manipulate text or graphics designated by the pointer. Press the right button to display a menu or other function depending on the software you are using.

  • Page 63: Using The Fingerprint Sensor

    Operating Basics Replacing the cap The AccuPoint cap is an expendable item that should be replaced after prolonged use. 1. To remove the AccuPoint cap, firmly pinch the cap and pull it straight Removing the AccuPoint cap 2. Position a new cap on the peg and press it into place. The peg is square, so be careful to align the cap’s square hole with the peg.

  • Page 64: Points To Note About The Fingerprint Sensor

    Operating Basics Points to note about the Fingerprint Sensor Please be aware of the following considerations when using the fingerprint sensor. A failure to follow these guidelines might result in damage to the sensor, sensor failure, fingerprint recognition problems or a lower fingerprint recognition success rate.

  • Page 65: How To Delete The Fingerprint Data

    Toshiba does not guarantee that the fingerprint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.

  • Page 66: Points To Note About The Fingerprint Utility Software

    Operating Basics Points to note about the Fingerprint Utility software You are able to backup saved fingerprint data and information within the PasswordBank by using the Import or Export User Data facility under the fingerprint management software. However, please be aware that any encrypted files cannot be backup within Mysafe using this function - in these instances it is recommended that you backup these files to external media using standard file copy processes.

  • Page 67: Windows Logon Via Fingerprint Authentication

    Operating Basics 3. At the User’s Password screen which is then displayed, you should ensure that the same Windows username is displayed before entering the appropriate password into the Enter your password field. Once this has been done, click Next. 4.
  • Page 68 ■ You must ensure that you use the TOSHIBA Password Utility to register a User Password before using the Fingerprint Power-on Security and its extended function to allow fingerprints to be used to access the computer when it is switched on.

  • Page 69: Fingerprint Utility Limitations

    TOSHIBA does not guarantee that the fingerprint utility technology will be completely secure or error-free, or that it will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the fingerprint software.

  • Page 70: Using The Optional Usb Floppy Disk Drive

    Operating Basics ■ Avoid swiping with the finger stiff or pressed-on too hard Fingerprint reading may fail if the center of the fingerprint is not touching on the sensor, or when finger is swiped while pressing hard. Make sure that the center of the fingerprint is touching the sensor before swiping.

  • Page 71: Changing Ultra Slim Bay Modules

    Bay HDD adaptor. To avoid injury, do not put your hand into the Ultra Slim Bay slot. The TOSHIBA Mobile Extension is preinstalled to support hot swapping under Windows. Refer to Chapter 1, Introduction, for information on using this utility to change modules while the computer’s power is on.

  • Page 72: Inserting A Module

    Operating Basics Lock screw Ultra Slim Bay latch optical disc drive Removing the optical disc drive Inserting a module Insert the Ultra Slim Bay HDD adaptor as described below. 1. Insert the Ultra Slim Bay HDD adaptor in the computer as shown below and press until the ejector clicks.

  • Page 73: Using Optical Disc Drives

    Operating Basics Using optical disc drives The full-size drive provides high-performance execution of CD/DVD-ROM- based programs. You can run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without an adaptor. An ATAPI interface controller is used for CD/DVD-ROM operation. When the computer is accessing a CD/DVD-ROM, an indicator on the drive glows.
  • Page 74 Operating Basics 3. Lay the CD/DVD, label side up, in the disc tray. Laser lens Inserting a CD/DVD When the disc tray is fully opened, the edge of the computer will extend slightly over the CD/DVD tray. Therefore, you will need to turn the CD/DVD at an angle when you place it in the disc tray.

  • Page 75: Removing Discs

    Operating Basics Removing discs To remove the CD/DVD, follow the steps below. Do not press the eject button while the computer is accessing the disc drive. Wait for the optical disc drive indicator to go out before you open the disc tray.

  • Page 76: Writing Cds On Dvd-Rom / Cd-R/Rw Drive

    Operating Basics How to remove CD/DVD when the disc tray will not open Pressing the eject button will not open the disc tray when the computer power is off. If the power is off, you can open the disc tray by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.

  • Page 77: Before Writing Or Rewriting

    RICOH Co., Ltd. Ultra-Speed CD-RW: MITSUBISHI CHEMICAL CORPORATION TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. ■ The actual number of rewrites to CD-RW is affected by the quality of the disc and the way it is used.

  • Page 78: Writing Cd/Dvds On Dvd Super Multi Drive

    Operating Basics When writing or rewriting Note the following when you write or rewrite a CD-R or CD-RW. ■ Always copy data from the hard disk drive to the optical media. Do not use cut-and-paste as the original data will be lost if there is a write error. ■...

  • Page 79: Important Message

    Based on TOSHIBA’s limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
  • Page 80 Operating Basics DVD-R: DVD Specifications for Recordable Disc for General Version 2.0 TAIYO YUDEN CO., LTD. Matsushita Electric Industrial Co., Ltd. DVD-R DL: MITSUBISHI CHEMICAL CORPORATION DVD+R: MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd. DVD+R DL: MITSUBISHI CHEMICAL CORPORATION DVD-RW: DVD Specifications for Recordable Disc for Version 1.1 or version 1.2 VICTOR COMPANY OF JAPAN.LIMITED MITSUBISHI CHEMICAL CORPORATION...
  • Page 81 Operating Basics ■ You can use DVD-RAM discs that can be removed from a cartridge and DVD-RAM discs designed without a cartridge. ■ Other DVD-ROM drives for computers or other DVD players may not be able to read DVD-R/-RW or DVD+R/+RW discs. ■...

  • Page 82: When Writing Or Rewriting

    Always copy data from the hard disk drive to the optical media. Do not use cut-and-paste. The original data will be lost if there is a write error. RecordNow! Basic for TOSHIBA Note the following limitations when you use RecordNow!: ■...

  • Page 83: Data Verification

    3. Mark the Verify data written to the disc after burning check box in the Data Options. Click the OK button. DLA for TOSHIBA Note the following limitations when you use DLA: ■ This software supports only rewritable discs (DVD+RW, DVD-RW, and CD-RW).

  • Page 84: When Using Windvd Creator Platinum

    Operating Basics ■ Do not use any discs that have been formatted with packet writing software other than DLA. Similarly, do not use any discs that have been formatted with DLA with any packet writing software other than DLA. When using a disc you are not familiar with, format it by selecting “Full Format”...

  • Page 85: How To Learn More About Intervideo Windvd Creator

    2. Before recording the video to DVD ■ When you record to DVD discs, please use only media recommended by TOSHIBA. ■ Do not set the working drive to a slow device like a USB 1.1 hard disk drive or it will fail to write the DVD.
  • Page 86 Operating Basics ■ Do not perform any of the following actions: ■ Operate the computer for any other function, including using a mouse or Touch Pad or closing/opening the LCD panel. ■ Bump or cause vibration to the computer. ■ Use the Mode control button and Audio/Video control button to reproduce music or voice.

  • Page 87: Media Care

    Operating Basics Media care This section provides tips on protecting data stored on your CD/DVDs and floppy disks. Handle your media with care. The following simple precautions will increase the lifetime of your media and protect the data stored on them: CD/DVDs 1.

  • Page 88: Sound System

    6. Check the Microphone Boost checkbox. TOSHIBA Mic Effect TOSHIBA Mic Effect is a utility used to enable comfortable calls with echo cancellation function. The echo cancellation function removes or reduces any harsh echoes or howling sounds that occur when playing audio sounds recorded with a microphone through the speakers.

  • Page 89: Modem

    Check the specified areas carefully before using it. To select a region, follow the steps below. 1. Click start followed by All Programs followed by TOSHIBA followed by Networking and then click Modem Region Select. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.

  • Page 90: Properties Menu

    Operating Basics Properties menu Click the icon with the secondary mouse button to display properties menu on the screen. Setting You can enable or disable the following settings: AutoRun Mode The Region Select utility starts automatically when you start up the operating system.
  • Page 91 Operating Basics ■ Connection to any communication line other than an analog phone line could cause a PC system failure. ■ Connect the built-in modem only to ordinary analog phone lines. ■ Never connect the built-in modem to a digital line (ISDN). ■...

  • Page 92: Wireless Communications

    Operating Basics Disconnecting To disconnect the internal modular cable, follow the steps below. 1. Pinch the lever on the connector in the telephone jack and pull out the connector. 2. Disconnect the cable from the computer’s modem jack in the same manner.

  • Page 93: Bluetooth Stack For Windows

    ■ TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Bluetooth wireless technology Bluetooth™...

  • Page 94: Wireless Communication Switch

    ® 1. Install: ® On Windows2000 or Windows XP, Bluetooth™ Stack for Windows TOSHIBA does not have a digital signature. 2. Fax application software: Regarding FAX application software, there are some software that you cannot use on this Bluetooth™ Stack.

  • Page 95: Lan

    Operating Basics Wireless communication Indicator The wireless communication indicator indicates the status of the wireless communication functions. Indicator status Indication Indicator off Wireless communication switch is set to off. Automatic power down because of overheating. Power malfunction. Indicator glows Wireless communication switch is on. Wireless LAN or Bluetooth is turned on by an application.

  • Page 96: Connecting Lan Cable

    Operating Basics Connecting LAN cable To connect the LAN cable, follow the steps below. ■ Connect the AC adaptor before connecting the LAN cable. The AC adaptor must remain connected during LAN use. If you disconnect the AC Adaptor while the computer is accessing a LAN, the system may hang up.

  • Page 97: Cleaning The Computer

    Operating Basics Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and use care with liquids around the computer. ■ Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely before you turn it on again.

  • Page 98: Using Hard Disk Drive (Hdd) Protection

    Please be aware that this function does not guarantee that the hard disk drive will not be damaged. ■ The secondary hard disk drive is not supported by the TOSHIBA HDD protection function. When vibration or shock is detected, the following message will be displayed and the icon in the notification area of the Windows Task Bar changed to its “protection”...

  • Page 99: Toshiba Hdd Protection Properties

    Control Panel. TOSHIBA HDD Protection Properties HDD Protection This section allows you to configure whether the TOSHIBA Hard Disk Drive Protection function is enabled or disabled. Detection Level This function can be set to one of four levels (OFF, 1, 2 and 3) depending on the environment in which the computer is being used.
  • Page 100 AC power (desktop) - with these settings configured, the detection level will automatically switch according to the power connection mode in use. Details To open the Details window, click the Setup Detail button in the TOSHIBA Hard Disk Drive Protection Properties window. Details...

  • Page 101: Heat Dispersal

    - these functions are controlled within the Cooling Method item of the Basic Setup tab in TOSHIBA Power Saver. When the processor’s temperature falls to a normal range, the fan will be turned off and the processor operation returned to its standard speed.
  • Page 102 Operating Basics 4-42 User’s Manual...

  • Page 103: Chapter 5 The Keyboard

    Chapter 5 The Keyboard The computer’s keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with.

  • Page 104: Function Keys: F1

    Soft keys: Fn key combinations The Fn (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.

  • Page 105: Hot Keys

    The Keyboard Press Fn + F10 or Fn + F11 to access the integrated keypad. When activated, the keys with gray markings on the bottom edge become numeric keypad keys (Fn + F11) or cursor control keys (Fn + F10). Refer to Keypad overlay section in this chapter for more information on how to operate these keys.
  • Page 106 F2 again to toggle between the settings. Release both Fn and F2 to put the new setting into effect. You can also change this setting through the Profile options in TOSHIBA Power Saver. Standby: When you press Fn + F3, the computer enters the Standby Mode.
  • Page 107 You can also change this setting through the Screen brightness item of the Basic Setup tab in TOSHIBA Power Saver. ■ The brightness level is always set at the maximum value for about 18 seconds, when the internal LCD screen turns on.

  • Page 108: Fn Sticky Key

    Fn key. Fn Sticky key You can use the TOSHIBA Accessibility Utility to make the Fn key sticky, that is, you can press it once, release it, and then press an “F number” key. To start the TOSHIBA Accessibility Utility, click start, point to All Programs, point to TOSHIBA, point to Utilities and click Accessibility.

  • Page 109: Windows Special Keys

    The Keyboard Windows special keys The keyboard provides two keys that have special functions in Windows: Windows logo key activates the start menu and the other, the application key, has the same function as the secondary mouse button. This key activates the Windows start menu. This key has the same function as the secondary mouse button.

  • Page 110: Numeric Mode

    The Keyboard Numeric mode To turn on the Numeric mode, press Fn + F11. The Numeric mode indicator lights. Now try numeric data entry. Press Fn + F11 again to turn off the overlay. The numeric keypad overlay Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1.

  • Page 111: Generating Ascii Characters

    The Keyboard Temporarily changing modes If the computer is in Numeric mode, you can switch temporarily to Arrow mode by pressing a shift key. If the computer is in Arrow mode, you can switch temporarily to Numeric mode by pressing a shift key. Generating ASCII characters Not all ASCII characters can be generated using normal keyboard operation.
  • Page 112 The Keyboard 5-10 User’s Manual...

  • Page 113: Chapter 6 Power And Power-Up Modes

    Chapter 6 Power and Power-Up Modes The computer’s power resources include the AC adaptor, battery pack and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes. Power conditions The computer’s operating capability and battery charge status are affected by the power conditions: whether an AC adaptor is connected, whether a...

  • Page 114: Power Indicators

    Power and Power-Up Modes Power conditions (continued) Power on Power off (no operation) AC adaptor Battery charge is • Operates above low battery • LED: Battery off connected trigger point DC IN off Battery charge is • Operates below low battery •...

  • Page 115: Battery Types

    Power and Power-Up Modes DC IN indicator Check the DC IN indicator to determine the power status with the AC adaptor connected: Indicates the AC adaptor is connected and Green supplying proper power to the computer. Indicates a problem with the power supply. Plug Flashing orange the AC adaptor into another power outlet.

  • Page 116: Battery Pack

    The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Always use the battery pack supplied as an accessory or an equivalent battery pack specified in the User’s Manual.
  • Page 117 Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not remove the battery pack while the computer is in Standby Mode.

  • Page 118: Care And Use Of The Battery Pack

    Chapter 9, Troubleshooting, for the detail. The computer’s RTC battery is a Ni-MH battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of.

  • Page 119: Charging The Batteries

    The Battery indicator glows orange when the battery is being charged. Use only the computer connected to an AC power source or the optional TOSHIBA Battery charger to charge the battery pack. Never attempt to charge the battery pack with any other charger.

  • Page 120: Battery Charging Notice

    Power and Power-Up Modes Time The following table shows the approximate time required to fully charge a discharged battery. Charging time (hours) Battery type Power on Power off High capacity battery pack (8800mAh) about 5.0 to 19.0 about 4.0 Extended capacity battery pack (7050mAh) about 4.0 to 15.0 about 3.0 Battery pack (4700mAh) about 3.0 to 10.0...

  • Page 121: Monitoring Battery Capacity

    In view of this it will be noted that an often used, older battery will not operate for as long as a new battery even when both are fully charged. In this instance, the TOSHIBA Power Saver will indicate a 100% charge for both the old and new battery, but the displayed estimated time remaining will be shorter for the older battery.

  • Page 122: Retaining Data With Power Off

    Power and Power-Up Modes ■ The condition of the battery terminals - you should always ensure the terminals stay clean by wiping them with a clean dry cloth before installing the battery pack. Battery operating time can be extended by lowering the screen refresh rate from 60Hz to 40Hz.

  • Page 123: Replacing The Battery Pack

    Power and Power-Up Modes Extending battery life To maximize the life of your battery packs: ■ At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges. Before doing so, follow the steps as detailed below.
  • Page 124 Power and Power-Up Modes ■ Do not remove the battery pack while the computer is in Standby Mode. Data is stored in RAM, so if the computer loses power it will be lost. ■ In Hibernation Mode, data will be lost if you remove the battery pack or disconnect the AC adaptor before the save is completed.

  • Page 125: Toshiba Password Utility

    Windows password. User Password To start the utility, point to or click the following items: start -> All Programs -> TOSHIBA -> Utilities -> Password Utility The User Password dialog box contains two main fields: User Password and User Token.
  • Page 126 If an unformatted card or one with an incompatible format is inserted, you will be prompted to format it with a tool named TOSHIBA SD Memory Card Format. To start the format tool, point to or click the following items: start ->...

  • Page 127: Supervisor Password

    Register, delete or change the Supervisor Password. ■ Create or invalidate a Supervisor Password token. This function in the TOSHIBA Password Utility lets you invalidate only supervisor tokens or all tokens, including user and supervisor tokens. ■ Specify restrictions for general users.

  • Page 128: Power-Up Modes

    Started. Windows utilities You can configure various settings associated with both Standby Mode and Hibernation Mode within TOSHIBA Power Saver. Hot keys You can use hot keys Fn + F3 to enter Standby Mode and Fn + F4 to enter Hibernation.

  • Page 129: Chapter 7 Hw Setup & Bios Setup

    Chapter 7 HW Setup & BIOS Setup This chapter explains how to use the TOSHIBA HW Setup program to configure your computer, and provides information on other settings. Accessing HW Setup To run the HW Setup program, click start followed by Control Panel followed by Printers and Other Hardware and then click TOSHIBA HW Setup.

  • Page 130: Power On Display

    HW Setup & BIOS Setup General This window displays the BIOS version and contains two buttons: Default and About. Return all HW Setup values to the factory Default settings. Display the HW Setup version. About Setup This field displays BIOS Version and date. Display This tab lets you customize your computer’s display settings for either the internal LCD screen or for an external monitor.

  • Page 131: Boot Priority

    HW Setup & BIOS Setup Boot Priority Boot Priority Options This tab allows you to select the priority for booting the computer - the following settings are available: HDD −> FDD −> The computer looks for bootable files in the CD-ROM −>...
  • Page 132 HW Setup & BIOS Setup To change the boot drive, follow the steps below. 1. Hold down F12 and boot the computer. 2. The following menu will be displayed with the following icons: Built-in HDD, Ultra Slim Bay HDD, CD-ROM, FDD (or SD memory card), Network (LAN), USB Memory boot.
  • Page 133 HW Setup & BIOS Setup ■ If a boot command is not found on the first detected hard disk drive, the system will not boot from next hard disk drive in the list, instead it will search for the next device in the Boot Priority list and startup from this as appropriate.
  • Page 134 HW Setup & BIOS Setup Wake-up on Keyboard When this feature is enabled, and the computer is in Standby Mode, you can turn on the system by pressing any key. However, please be aware that this option will only work with the internal keyboard and only when the computer is in Standby Mode.

  • Page 135: Device Config

    HW Setup & BIOS Setup Do not install or remove an optional memory module while Wake-up on LAN is enabled. The Wake-up on LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature. Built-in LAN This feature enables or disables the Built-in LAN.

  • Page 136: Bios Setup Program

    ■ In most cases, changes to the system’s configuration should be made within Windows by using applications such as TOSHIBA HW Setup, TOSHIBA Password Utility, TOSHIBA Power Saver, Windows Device Manager and so forth. If you make changes to the configuration through the BIOS setup program, please be aware that the configuration set through the Windows applications will take priority.

  • Page 137: Starting And Ending The Bios Setup Program

    Password = prompt is displayed, enter either the Supervisor Password, if one is set, or the User Password and press the Enter key. Please refer to the TOSHIBA Password Utility section in Chapter 6, Power and Power-Up Modes, for further details about the User Password.

  • Page 138: Lcd Display Stretch

    HW Setup & BIOS Setup The Virtualization Technology is supported with some models. The Disabled command does not allow use of the Intel Virtualization Technology. The Enabled command allows use of the Intel Virtualization Technology. Enables Virtualization Technology. Enabled Disables Virtualization Technology (Default). Disabled Enhanced C-States This feature enables or disables the Enhanced C-States.

  • Page 139: Security Controller

    Enable to Disabled and the setting no longer displayed. When using TPM, please install the Infineon TPM Installation Guide from the TOSHIBA Application Installer and ensure that the user reads the Infineon TPM Installation Guide as it contains usage information and notes on using TPM security.
  • Page 140 HW Setup & BIOS Setup 7-12 User’s Manual...

  • Page 141: Chapter 8 Optional Devices

    Chapter 8 Optional Devices Optional devices can expand the computer’s capabilities and its versatility. This chapter describes connection or installation of the following devices, which are available from your TOSHIBA dealer: Cards/memory ■ PC card ■ ExpressCard ■ SD card ■...

  • Page 142: Pc Card

    The computer is equipped with a PC card slot that can accommodate a Type II card. Any PC card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slot supports 16-bit PC cards, including PC card 16’s multifunction card and CardBus PC cards.

  • Page 143: Expresscard

    ExpressCard The computer is equipped with an ExpressCard slot. Any ExpressCard that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slot supports hot plug connection and utilizes the PCI-Express interface that supports the reading and writing of data at a theoretical maximum rate of 2.5 Gbps.

  • Page 144: Removing An Expresscard

    Optional Devices To insert an ExpressCard, follow the steps below: 1. Insert an ExpressCard in the ExpressCard slot. 2. Press gently to ensure a firm connection. ExpressCard slot ExpressCard Inserting the ExpressCard 3. After inserting the ExpressCard, refer to the ExpressCard’s documentation and check the configuration in Windows to make sure it is appropriate for your ExpressCard.

  • Page 145: Sd Card

    TOSHIBA SD memory card format utility, not with the format commands provided within Windows. In order to run TOSHIBA SD memory card format, click start, point to All Programs, point to TOSHIBA, point to Utilities and click SD memory card Format.

  • Page 146: Removing An Sd Card

    Optional Devices ■ Make sure the SD card is oriented properly before you insert it. ■ Do not turn the computer off or switch to Standby Mode or Hibernate Mode while files are being copied - doing so may cause data to be lost. Removing an SD card To remove an SD card, follow the steps below.

  • Page 147: Memory Expansion

    Do not touch the metal part or expose it to liquids or let it get dirty. Creation of a boot disk Within the TOSHIBA SD Memory Boot Utility, a bootable SD memory card can be created if required. Refer to the...

  • Page 148: Installing Memory Module

    Optional Devices Points to note about memory modules If you install a memory module that is not compatible with the computer, the power LED will flashes (on for 0.5 seconds, off for 0.5 seconds) in the following ways; ■ If there is only an error in Slot A: repeatedly flashes orange twice, then green.
  • Page 149 Optional Devices Slot B Slot A Seating the memory module Align the grooves along the edges of the memory module with the locking tabs on the connector and insert the module into the connector firmly. If you find it difficult to install the memory module, gently prize the locking tabs outwards using the tip of your finger.

  • Page 150: Removing Memory Module

    Optional Devices Removing memory module To remove the memory module, make sure the computer is in boot mode then: 1. Set the computer to boot mode and turn the computer’s power off. Make sure the Power indicator is off. 2. Remove AC adaptor and all cables connected to the computer. 3.

  • Page 151: Battery Pack

    Optional Devices Battery pack You can increase the portability of the computer with additional battery packs. If you’re away from an AC power source and your battery runs low, you can replace it with a freshly charged battery. Refer to Chapter 6, Power and Power-Up Modes.

  • Page 152: Installing The Hard Disk Drive Pack

    Optional Devices 6. Press on the arrows and lift the cover up and out to remove it. Screw Hard disk drive cover Removing the hard disk drive cover 7. Reposition the hard disk drive until it is vertical. 8. With the hard disk drive in a vertical position, lift it straight up and away from the connector.

  • Page 153: Ultra Slim Bay Hdd Adaptor

    Optional Devices 4. With the connector connected, lower the hard disk drive down to the storage position. Plastic tab Hard disk drive pack Connector Installing the hard disk drive pack 5. Seat the cover and press down until the latches click into place. 6.

  • Page 154: Usb Floppy Disk Drive

    Optional Devices 2. Insert the hard disk drive in the Ultra Slim Bay HDD adaptor and push forward to ensure a firm connection. Hard disk drive Inserting the hard disk drive 3. Close the lid and slide the lock to the lock position. Closing the lid For details on inserting the Ultra Slim Bay HDD adaptor in the computer’s Ultra Slim Bay slot, refer to Chapter 4,...

  • Page 155: External Monitor

    Optional Devices External monitor An external analog monitor can be connected to the external monitor port on the computer. The computer supports XGA and SXGA+ video modes. To connect a monitor, follow the steps below. 1. Turn the computer’s power off. 2.

  • Page 156: Using The Toshiba Presentation Button

    Connecting the S-Video cable to the Video-out jack 2. Connect the TV adaptor cable’s S-Video plug to the Video-out jack on the TV. 3. Press the TOSHIBA Presentation button. You can use the hot keys Fn + F5 to change the display device. Refer to Chapter 5, Keyboard.

  • Page 157: Displaying Movies On A Tv Or Crt

    Optional Devices Displaying movies on a TV or CRT This section describes how to set up your system to display movies simultaneously on your computer’s internal LCD and on an external TV or CRT monitor. Follow the steps below. 1. Open the Control Panel and click Appearance and Themes. 2.
  • Page 158 There is a possibility that the original data will be damaged. There is a particular risk that some frames will be deleted in the case of digital video transfer. TOSHIBA assumes no liability for such loss of data. ■ Do not transfer data in areas where static electricity is easily generated or in areas subjected to electronic noise.

  • Page 159: Advanced Port Replicator Iii Plus

    Optional Devices Disconnecting 1. Open the Safely Remove Hardware icon on the Task Bar. 2. Point to i.LINK (IEEE1394) device and click. 3. Disconnect the cable from the computer then from the i.LINK device. Refer also to the documentation that came with your i.LINK device. Advanced Port Replicator III Plus In addition to the ports available on the computer, the Advanced Port Replicator III Plus provides separate ports for PS/2 mouse and PS/2...

  • Page 160: Parallel Printer

    8. Start the HW Setup program. Refer to Chapter 7, HW Setup & BIOS Setup. 9. Select the Parallel/Printer tab from the TOSHIBA HW Setup window. 10. Set the Parallel Port Mode and press OK. 11. Choose Reboot for the change to take effect.

  • Page 161: Security Lock

    Optional Devices Serial port Serial connector Connecting the serial connector to the serial port Security lock Security locks enable you to anchor your computer and optional Advanced Port Replicator III Plus to a desk or other heavy object to help prevent unauthorized removal of the computer or Advanced Port Replicator III Plus.
  • Page 162 Optional Devices 8-22 User’s Manual...

  • Page 163: Chapter 9 Troubleshooting

    Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.

  • Page 164: Preliminary Checklist

    Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer.

  • Page 165: Hardware And System Checklist

    Before using a peripheral device or application software that is not an authorized Toshiba part or product, make sure the device or software can be used with your PC. Use of incompatible devices may cause injury or may damage your PC.

  • Page 166: Self Test

    This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system, depending on how the Boot Priority is set in the TOSHIBA HW Setup program. If any of the following conditions are present, the self test failed: ■...

  • Page 167: Ac Power

    Troubleshooting Computer shuts down Indicates a problem with the heat dispersal and its DC IN indicator system. Please contact your dealer. is flashing green AC power If you have trouble turning on the computer with the AC adaptor connected, check the DC IN indicator. Refer to Chapter 6, Power and Power-Up Modes for more information.
  • Page 168 Fully discharge the battery, then try to charge it again. Check the power consumption settings in TOSHIBA Power Saver utility. Consider using a power saving mode. User’s Manual...

  • Page 169: Real Time Clock

    5. Press Y key. BIOS setup will terminate and the computer will be rebooted. Password Problem Procedure Cannot enter Refer to the TOSHIBA Password Utility section in password Chapter 6, Power and Power-Up Modes. Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, Keyboard.

  • Page 170: Internal Lcd Display Panel

    Troubleshooting Internal LCD display panel Apparent LCD problems may be related to the computer’s setup. Refer to Chapter 7, HW Setup & BIOS Setup, for more information. Problem Procedure No display Press hotkeys Fn + F5 to change the display priority, to make sure it is not set for an external monitor.
  • Page 171 Troubleshooting DVD-ROM and CD-R/RW drive For more information, refer to Chapter 4, Operating Basics. Problem Procedure You cannot access a Make sure the drive’s disc tray is securely CD/DVD in the drive closed. Press gently until it clicks into place. Check whether the drive power is on.
  • Page 172 Procedure Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.
  • Page 173 Troubleshooting Problem Procedure Some CD/DVDs run The software or hardware configuration may be correctly, but others do causing a problem. Make sure the hardware configuration matches your software’s needs. Check the CD/DVD’s documentation. Check the type of CD/DVD you are using. The drive supports: DVD-ROM: DVD-ROM, DVD-Video...

  • Page 174: Infrared Port

    Troubleshooting Problem Procedure You cannot write to an Make sure the card is not write protected. SD memory card You cannot read a file Make sure the target file is on the SD memory card inserted in the slot. If problems persist, contact your dealer. PC card Refer also to Chapter 8, Optional...

  • Page 175: Dual Pointing Device

    Device tab. Then click the Detail Setting button and click the Device Select tab. Check whether the Touch Pad is selected or not. Pressing Fn + F9 to enable TOSHIBA Dual Pointing Device. On-screen pointer The system might be busy. If the pointer is...

  • Page 176: Fingerprint Sensor

    Troubleshooting USB mouse Problem Procedure On-screen pointer The system might be busy. If the pointer is does not respond to shaped as an hourglass, wait for it to resume its mouse operation normal shape and try again to move it. Make sure the mouse is properly connected to the USB port.

  • Page 177: Usb Device

    Troubleshooting USB device Refer also to your USB device’s documentation. Problem Procedure USB device does not Check for a firm cable connection between the work USB ports on the computer and the USB device. Make sure the USB device drivers are properly installed.
  • Page 178 Troubleshooting Sound system Refer also to documentation for your audio devices. Problem Procedure No sound is heard Adjust the volume control dial. Check the software volume settings. Make sure the headphone connection is secure. If problems persist, contact your dealer. Check Windows Device Manager.
  • Page 179 Troubleshooting i.LINK (IEEE1394) device Problem Procedure i.LINK device does not Make sure the cable is securely connected to the function computer and to the device. Make sure the device’s power is turned on. Reinstall the drivers. Open the Windows Control Panel and double-click the Add Hardware icon.

  • Page 180: Wireless Lan

    Troubleshooting Problem Procedure You cannot receive an Check the rings before auto answer setting in incoming call your communications application. You can also use the ATS0 command. If problems persist, contact your dealer. Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN hub.
  • Page 181 Troubleshooting Bluetooth For more information on wireless communication, refer to Chapter 4, Operating Basics. Problem Procedure Cannot access Make sure the computer’s wireless Bluetooth device communication switch is set to on. Make sure the Bluetooth Manager is running and the power to the Bluetooth device is turned on. Make sure no optional Bluetooth PC card and Bluetooth SD card are installed in the computer.

  • Page 182: Tv Output Signal

    Troubleshooting TV output signal Problem Procedure Display on TV is poor Make sure the TV type is correct for your area: NTSC (US, JAPAN), PAL (Europe). No display Try adjusting the contrast and brightness controls on the external monitor. Press hotkeys Fn + F5 to change the display. Refer to Chapter 5, Keyboard.

  • Page 183: Toshiba Support

    Troubleshooting TOSHIBA Support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first.
  • Page 184 Troubleshooting 9-22 User’s Manual...

  • Page 185: Chapter 10 Legal Footnotes

    86°F) or >25°C (77°F) at high altitude (all temperature references are approximate and may vary depending on the specific computer model - please refer to your PC documentation or visit the Toshiba website at www.pcsupport.toshiba.com for details). User’s Manual...

  • Page 186: Memory (Main System)

    Published battery life numbers are achieved on select models and configurations tested by TOSHIBA at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.

  • Page 187: Lcd

    Legal Footnotes Over a period of time, and depending on the usage of the computer, the brightness of the LCD screen will deteriorate. This is an intrinsic characteristic of LCD technology. Maximum brightness is only available when operating in AC power mode. The screen will dim when the computer is operated on battery power and you will not be able to increase the brightness of the screen.
  • Page 188 Legal Footnotes 10-4 User’s Manual...

  • Page 189: Appendix A Specifications

    Appendix A Specifications This appendix summarizes the computer’s technical specifications. Physical Dimensions Size 338 (+6) (w) × 280 (+6) (d) × 29.9/38.6 (h) millimeters (not including parts that extend beyond the main body) Environmental Requirements Conditions Ambient temperature Relative humidity Operating 5°C (41°F) to 35°C (95°F) 20% to 80%...
  • Page 190 Specifications Power Requirements AC adaptor 100-240 volts AC 50 or 60 hertz (cycles per second) Computer 15 VDC 5.0 amperes Built-in Modem Network control unit (NCU) Type of NCU Type of line Telephone line (analog only) Type of dialing Pulse Tone Control command AT commands...
  • Page 191 Specifications Transmitting level -10 dBm Receiving level -10 to -40 dBm Input/output 600 ohms ±30% impedance Error correcting MNP class 4 and ITU-T V.42 Data compression MNP class 5 and ITU-T V.42bis Power supply +3.3V (supplied by computer) User’s Manual...
  • Page 192 Specifications User’s Manual...

  • Page 193: Display Controller And Modes

    Appendix B Display Controller and Modes Display controller The display controller interprets software commands into hardware commands that turn particular parts on the screen on or off. Because of the LCD’s increased resolution, lines may appear broken in DOS mode. The display controller also controls the video mode, which uses industry standard rules to govern the screen resolution and the maximum number of colors that can be displayed on screen.

  • Page 194: Powermizer

    Display Controller and Modes PowerMizer PowerMizer is a graphics processor installed on this computer. The performance of PowerMizer can be configured in three ways. To define the performance, select the menu options shown below: Display Property -> Settings -> Advanced -> Quadro NVS 110M tab -> Quadro NVS 110M button ->...

  • Page 195: Wireless Lan

    Appendix C Wireless LAN Card Specifications Form Factor PCI-Ex MiniCard Type ■ IEEE 802.11 Standard for Wireless LANS Compatibility ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. The “Wi-Fi CERTIFIED” logo is a certification mark of the Wi-Fi Alliance. ■...

  • Page 196: Supported Frequency Sub-Bands

    Subject to the radio regulations that apply in the countries/regions, your Wireless LAN card may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in the countries/regions.
  • Page 197 Wireless LAN 2442 2447 2452 2457* 2462 2467* 2472* *1 Factory-set default channels *2 Refer to the sheet Approved Countries/Regions for use for the countries/regions that in which these channels can be used. When installing Wireless LAN cards, the channel configuration is managed as follows: ■...
  • Page 198 Wireless LAN 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825 User’s Manual...

  • Page 199: Toshiba Raid

    Please refer to the TOSHIBA RAID help for details. ■ By changing this setting you are reconfiguring your hard disk.

  • Page 200: Windows Manual Setup

    3. When the message “Setup will load support for the following mass storage device(s):” appears on the screen, press the S key and install the TOSHIBA RAID Driver using the TOSHIBA RAID Driver Disk that was created. 4. Follow the onscreen instructions to continue Windows setup.
  • Page 201 An effective way to ensure that such situations do not happen is to carry out RAID-1 media checks regularly. The TOSHIBA RAID utility is set as default to carry out media checks every month on the third Wednesday from noon.

  • Page 202: Starting, Modifying And Ending The Bios Setup Program

    1. Switch on your computer while pressing the Esc key. If Password = is displayed, enter the User Password and press the Enter key. Please refer to the TOSHIBA Password Utility section in Chapter 6, Power and Power-Up Modes, for details about the User Password.

  • Page 203: Ending The Bios Setup Program

    TOSHIBA RAID 3. The Execute Creation message is displayed once the configuration is modified. Move the cursor to the appropriate location and press the space bar to continue. Pressing the Home key will revert the modified Create State settings back to the Current State settings.
  • Page 204 TOSHIBA RAID User’s Manual...

  • Page 205: Appendix E Bluetooth Wireless Technology Interoperability

    Appendix E Bluetooth wireless technology Interoperability Bluetooth™ Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ■ Bluetooth Specification Ver2.0+EDR, as defined and approved by The Bluetooth Special Interest Group.
  • Page 206 TOSHIBA portable computers. Always use Bluetooth™ Cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe...

  • Page 207: Bluetooth Wireless Technology And Your Health

    Because products with Bluetooth wireless technology operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Bluetooth wireless technology is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
  • Page 208 ■ Consult the dealer or an experienced radio/TV technician for help. TOSHIBA is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this Bluetooth™ Card from TOSHIBA, or the substitution or attachment of connecting cables and equipment other than specified by TOSHIBA.
  • Page 209 The radiated output power of the Bluetooth™ Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth™ Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized. The...

  • Page 210: Using Bluetooth™ Card From Toshiba Equipment In Japan

    3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations. 2. Indication The indication shown below appears on this equipment.

  • Page 211: Approved Countries/Regions For Use (Bluetooth™ Wireless Technology

    Do not install the embedded wireless module into other device. Approved Countries/Regions for use (Bluetooth™ wireless technology) Bluetooth™ Card from TOSHIBA equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
  • Page 212 Bluetooth wireless technology Interoperability User’s Manual...

  • Page 213: Ac Power Cord And Connectors

    Appendix F AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 2 meters...
  • Page 214 AC Power Cord and Connectors In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV-F. For the United States and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125V) and three pin plug configuration must be 6-15P (250V) or 5-15P (125V) as designated in the U.S.

  • Page 215: Toshiba Anti-Theft Protection Timer

    BIOS and Hard Disk Drive to gain access to the system. To set permissions and limits for the TOSHIBA Anti-theft Protection Timer please use the TOSHIBA Password Utility. The settings can only be activated or modified by a user with supervisor authority.
  • Page 216 TOSHIBA Anti-theft Protection Timer User’s Manual...

  • Page 217: If Your Computer Is Stolen

    What is your address, phone, and fax number? To register the theft on paper, please follow these procedures: ■ Fill in the TOSHIBA Theft Registration form (or a copy of it) below. ■ Attach a copy of your receipt showing where your computer was purchased.
  • Page 218 If your computer is stolen TOSHIBA Theft Registration Send to: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr. 2 93055 Regensburg Germany Fax number: +49 (0) 941 7807 921 Country stolen: Machine type: (e.g. Satellite A50) Model number: (e.g. PSA50 YXT) Serial number: (e.g.

  • Page 219: Glossary

    Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port ANSI: American National Standards Institute APM: advanced power manager ASCII: American Standard Code for Information Interchange BIOS: basic input output system CD-ROM: Compact Disc-Read Only Memory CD-RW: Compact Disc-ReWritable...
  • Page 220 VRT: voltage reduction technology WXGA: wide extended graphics array XGA: extended graphics array AccuPoint: A pointing device integrated into the TOSHIBA computer keyboard. adaptor: A device that provides an interface between two dissimilar electronic devices. For example, the AC adaptor modifies the power from a wall outlet for use by the computer.
  • Page 221 alternating current (AC): Electric current that reverses its direction of flow at regular intervals. analog signal: A signal whose characteristics such as amplitude and frequency vary in proportion to (are an analog of) the value to be transmitted. Voice communications are analog signals. ANSI: American National Standards Institute.
  • Page 222 boot: Short for bootstrap. A program that starts or restarts the computer. The program reads instructions from a storage device into the computer’s memory. bps: Bits per second. Typically used to describe the data transmission speed of a modem. buffer: The portion of the computer’s memory where data is temporarily stored.
  • Page 223 CMOS: Complementary Metal-Oxide Semiconductor. An electronic circuit fabricated on a silicon wafer that requires very little power. Integrated circuits implemented in CMOS technology can be tightly packaged and are highly reliable. cold start: Starting a computer that is currently off (turning on the power). COM1, COM2, COM3 and COM4: The names assigned to the serial and communication ports.
  • Page 224 cursor: A small, blinking rectangle or line that indicates the current position on the display screen. data: Information that is factual, measurable or statistical that a computer can process, store, or retrieve. data bits: A data communications parameter controlling the number of bits (binary digits) used to make up a byte.
  • Page 225 DVD-R (+R, -R): A Digital Versatile Disc-Recordable disk can be written once and read many times. The DVD-R drive uses a laser to read data from the disc. DVD-RAM: A Digital Versatile Disc-Random Access Memory is a high- capacity, high performance disc that lets you store large volumes of data.
  • Page 226 The computer’s feature in which certain keys in combination with the extended function key, Fn, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. User’s Manual...
  • Page 227 icon: A small graphic image displayed on the screen or in the indicator panel. In Windows, an icon represents an object that the user can manipulate. i.LINK (IEEE1394): This port enables high-speed data transfer directly from external devices such as digital video cameras. infrared port: A cableless communications port capable of using infrared signals to send serial data.
  • Page 228 keyboard: An input device containing switches that are activated by manually pressing marked keys. Each keystroke activates a switch that transmits a specific code to the computer. For each key, the transmitted code is, in turn, representative of the (ASCII) character marked on the key.
  • Page 229 motherboard: A name sometimes used to refer to the main printed circuit board in processing equipment. It usually contains integrated circuits that perform the processor’s basic functions and provides connectors for adding other boards that perform special functions. Sometimes called a main board. MP3: An audio compression standard that enables high-quality transmission and real-time playback of sound files.
  • Page 230 The electrical connection through which the computer sends and receives data to and from devices or other computers. Power Saver Utility: A TOSHIBA utility that lets you set the parameters for various power-saving functions. printed circuit board (PCB): A hardware component of a processor to which integrated circuits and other components are attached.
  • Page 231 restart: Resetting a computer without turning it off (also called “warm boot” or “soft reset”). See also boot. RGB: Red, green, and blue. A device that uses three input signals, each activating an electron gun for a primary additive color (red, green, and blue) or port for using such a device.
  • Page 232 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. Touch Pad: A pointing device integrated into the TOSHIBA computer palm rest. TTL: Transistor-transistor logic. A logic circuit design that uses switching transistors for gates and storage.
  • Page 233 ASCII characters, 5-9 controller, B-1 hinge, 2-9 opening, 3-4 Battery screen, 2-10 charging, 6-7 DLA for TOSHIBA, 1-16, 4-23 extending life, 6-11 Docking interface, 1-7, 2-7 indicator, 2-12, 6-2 Documentation list, 1-2 location, 2-7 Dual Pointing Device, 1-7 monitoring capacity, 6-9...
  • Page 234 Index Equipment checklist, 1-1 Hard disk drive, 1-5, 1-18 ExpressCard, 1-8, 8-3 automatic power off, 1-11 inserting, 8-3 Installing, 8-12 location of slot, 2-3 Removing, 8-11 problems, 9-12 HDD indicator, 2-12 removing, 8-4 HDD Protection, 1-12 External monitor, 1-7, 2-4, 8-15 Heat dispersal, 1-12, 4-41 problems, 9-16 Hibernation, 1-12, 5-4...
  • Page 235 Index Keyboard, 1-7, 5-1 NVIDIA Rotation Settings, 1-15 emulating enhanced keyboard, Password Fn Sticky key, 5-6 power on, 1-11 Function keys F1...F12, 5-2 problems, 9-7 Hot keys, 5-3 starting the computer by, 6-15 problems, 9-7 Supervisor, 6-15 typewriter keys, 5-1 user, 6-13 Windows special keys, 5-7 PC card, 1-8, 8-2...
  • Page 236 TV output signal, 9-20 TOSHIBA Mic Effect, 1-15 USB, 9-15 TOSHIBA Mobile Extension, 1-15 USB floppy disk drive, 9-11 TOSHIBA PC Diagnostic Tool, 1-14 USB mouse, 9-14 TOSHIBA Power Saver, 1-13 Wireless LAN, 9-18 TOSHIBA Presentation button, 1-10 Processor, 1-3...
  • Page 237 Index USB, 1-7 location, 2-5, 2-6 Wireless communication, 4-32 problems, 9-15 indicator, 2-12, 4-35 USB floppy disk drive Wireless communication switch, problems, 9-11 1-10, 2-2, 4-34 using, 4-10 Wireless LAN, 1-9, 4-32 problems, 9-18 Video modes, B-1 Video RAM, 1-4 Volume control, 2-2 User’s Manual Index-5...
  • Page 238 Index Index-6 User’s Manual...

Table of Contents