Specification Of The Failed Hdd - Toshiba TECRA S4 Maintenance Manual

3 Tests and Diagnostics
TOSHIBA RAID / RAID Information Display
Copyright(c) 2005 TOSHIBA CORPORATION. All Rights Reserved.
Level
LD0 RAID-0 OPTIMAL
Write cache
MBR Protection
S.M.A.R.T
LD1 RAID-0 OPTIMAL
Write cache
MBR Protection
S.M.A.R.T
Port Assgn Status
0 LD0-0 ONLINE
1 LD0-0 ONLINE
< RAID : RAID-0 >
3.3.2.3 RAID-0 (2)
When there is one LD and "RAID-0 Critical" is displayed in the
judged that the RAID is configured by two drives.
Level
LD0 RAID-0 Critical
Stripe Size
Write cache
MBR Protection
S.M.A.R.T
Port Assgn Status
0 LD0-0 ONLINE
1 NODRIVE
< RAID : not OPTIMAL >

3.3.3 Specification of the failed HDD

Check the RAID configuration condition from the
failed drive.
3-12
Status
xxGB
: Enable
: Disable
: Enable
xxGB
: Enable
: Disable
: Enable
Size
xxGB
xxGB
Status
xxGB
: 64KB
: Enable
: Disable
: Enable
Size
xxGB
[CONFIDENTIAL]
3.3 Check of the RAID configuration
Capacity
Model
FUJITSU--------------
FUJITSU--------------
Capacity
Model
FUJITSU--------------
TECRA S3 Maintenance Manual (960-532)
Rev xx.xx.xxxx
shown below, it is
shown below and specify a
Rev
xxxxxxx
xxxxxxx
Rev
xxxxxxx