Toshiba TECRA S4 Maintenance Manual page 336

4 Replacement Procedure 4.30 Fluorescent Lamp
Assembling the 15.0-inch XGA Sharp fluorescent lamp
To assemble the 15.0-inch Sharp XGA fluorescent lamp, follow the steps below and refer to
figures 4-75 to 4-87.
1. Install a new lamp unit (Q) on the P-chassis.
CAUTION: When install the lamp unit (Q), be careful not to bend or damage the
reflection sheet.
(Q)
Figure 4-75 Replacing Sharp fluorescent lamp (XGA) (11)
4-94 [CONFIDENTIAL] TECRA S3 Maintenance Manual (960-532)