Toshiba TECRA S4 Maintenance Manual page 234

3 Tests and Diagnostics
When "Enabled" is selected, the following sub-window appears.
Use this option to set a key combination on an external keyboard to emulate
the Fn key on the computer's internal keyboard. Setting a Fn key equivalent
will enable you to use "Hotkeys" by pressing the set combination in place of
the Fn key. The following items can be selected for this option:
Left Ctrl + Left Alt*
Right Ctrl + Right Alt*
Left Alt + Left Shift
Right Alt + Right Shift
Left Alt + Caps Lock
*If these selections are made, you cannot warm boot the system by pressing
Ctrl + Alt + Del.
(c) Parallel Port Mode
The option selects Parallel Port Mode.
ECP
Std. Bi-Direct.
15. Legacy Emulation.
(a) USB KB/Mouse Legacy Emulation.
This option sets the Legacy support condition of the USB keyboard and the
USB mouse.
Enabled
Disabled
(b) USB-FDD Legacy Emulation.
This option sets the Legacy support condition of the USB floppy disk drive.
Enabled
Disabled
3-116
KEYBOARD
= Left Ctrl + Left Alt
Sets the port mode to ECP (Extended Capabilities Port).
For most printers, the port should be set to ECP. (Default)
Sets the bi-directional setting. This setting should be used
with some other parallel devices.
USB Legacy Support can be used. (Default)
USB keyboard/USB mouse are available without a driver.
USB Legacy Support cannot be used.
USB Legacy Support can be used. (Default)
USB floppy disk is available without the driver.
USB Legacy Support cannot be used.
[CONFIDENTIAL] TECRA S3 Maintenance Manual (960-532)
3.31 SETUP