Toshiba TECRA S4 Maintenance Manual page 228

3 Tests and Diagnostics
(b) HDD Priority
This option enables to select the priority for the Built-in HDD, optional
second HDD or PC card.
Built-in HDD → Second HDD→USB
Second HDD → Built-in HDD→USB
Built-in HDD → USB → Second HDD
Second HDD → USB → Built-in HDD
USB → Built-in HDD → Second HDD
USB → Second HDD → Built-in HDD
NOTE: When the boot command can not be found in the specified HDD, the PC is
booted from other devices, not but from the other HDD.
7. Display
This group of options configures the computer's display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected
LCD+AnalogRGB
(b) LCD Display Stretch
LCD Display Stretch enables or disables a larger display area of the screen.
Enabled
Disabled
3-110
The priority is set as Built-in HDD → Second HDD→USB. (Default)
The priority is set as Second HDD → Built-in HDD→USB.
The priority is set as Built-in HDD → USB → Second HDD.
The priority is set as Second HDD → USB → Built-in HDD.
The priority is set as USB → Built-in HDD → Second HDD.
The priority is set as USB → Second HDD → Built-in HDD.
Selects an external monitor if one is connected.
Otherwise it selects the internal LCD. (Default)
Selects both the internal LCD and the external monitor
for simultaneous display.
Enables the LCD display stretch feature. (Default)
Disables the LCD display stretch feature.
[CONFIDENTIAL] TECRA S3 Maintenance Manual (960-532)
3.31 SETUP